How to troubleshoot power issues on my Yamaha RIVAGE PM?
To resolve the issue of your Yamaha Music Mixer not powering on, first, ensure all power switches are in the ON position. Next, verify that all AC power cords are securely connected. If the mixer still doesn't power up after these steps, it is recommended to contact your Yamaha dealer for further assistance.
What to do if my Yamaha Music Mixer is not receiving an audio input signal?
If your Yamaha Music Mixer isn't receiving an audio input signal, make sure the cables are properly connected. If you're using an optional card, ensure it's correctly installed.
Why does my Yamaha RIVAGE PM show [ERR P01] POWER A OFF?
If your Yamaha Music Mixer displays the error [ERR P01] POWER A OFF, it means power is not being supplied from power supply unit A. Ensure that the power switch on power supply unit A is turned on and that the power cord is correctly connected to both the unit and power supply unit A.
What does [ERR P02] POWER B OFF mean on my Yamaha Music Mixer?
If your Yamaha Music Mixer displays the error [ERR P02] POWER B OFF, it indicates that power is not being supplied from power supply unit B. To fix this, verify that the power switch on power supply unit B is turned on, and that the power cord is connected to both the unit and power supply unit B.
What does error [ERR T12] TWINLANe T V B OP IP mean on Yamaha Music Mixer?
If your Yamaha Music Mixer displays the error [ERR T12] TWINLANe T V B OP IP, ensure that the cable is securely inserted. Clean both ends of the cable and the connectors on the card using a commercially available cleaning tool designed for fiber optics. If the issue persists, try using a different cable. If these steps do not resolve the problem, contact your Yamaha dealer.
How to fix [ERR T0#] TWINLANe WRONG LOOP error on Yamaha RIVAGE PM Music Mixer?
If your Yamaha Music Mixer displays the error [ERR T0#] TWINLANe WRONG LOOP, the fiber optic cable might not be connected properly. Check the cable connection.
How do I resolve [ERR T0#] CONSOLE NETWK WRONG LOOP on my Yamaha RIVAGE PM?
If your Yamaha Music Mixer displays the error [ERR T0#] CONSOLE NETWK WRONG LOOP, it indicates that the Ethernet cable is not connected properly. Check the cable connection.
What should I do if my Yamaha RIVAGE PM Music Mixer shows [ERR W02] DATA CORRUPT TRY RE-SYNC?
If your Yamaha Music Mixer displays the error [ERR W02] DATA CORRUPT TRY RE-SYNC, it means the mix data inside the unit has been corrupted. Try data syncing again by transmitting data from the control surface.
General| Sampling Frequency | 96 kHz |
|---|---|
| Faders | Motorized |
| Series | RIVAGE PM |
| Type | Digital Mixing System |
| Digital I/O | AES/EBU |
| Networking | Dante |
| Network Audio Protocols | Dante |
| Touchscreen | Yes |
| Control Surfaces | Multiple options |
| Scene Memory | Yes |
To Next Page
