Yamaha RIVAGE PM10 - User Manual

Other manuals for Yamaha RIVAGE PM10

Owner's Manual28 pages

Systems Setup Guide56 pages

Questions and Answers

D
Daniel BrewerAug 19, 2025
How to troubleshoot no audio input on Yamaha RIVAGE PM10?
- H
  Holly CampbellSep 12, 2025
  If there is no audio input on your Yamaha Music Mixer, ensure the cables are correctly connected. Confirm the SIG indicator for the input connector on the RY card is steadily lit. If using a phantom-powered microphone, verify that both the [+48V MASTER] switch and the channel’s phantom power are on. Also, check that the input port is patched to the correct input channel. For optional I/O cards, ensure they are properly installed, and confirm the TWINLANe network card is in SLOT 1.
D
Derek PierceAug 21, 2025
What to do if Yamaha RIVAGE PM10 shows M1 [ERR P01] POWER A OFF?
- N
  Nicole PhamAug 21, 2025
  If your Yamaha Music Mixer displays the error 'M1 [ERR P01] POWER A OFF', it means power is not being supplied from power supply unit A. Ensure that the power switch on power supply unit A is turned on and that the power cord is properly connected to both the unit and power supply unit A.
T
Tracy MartinAug 23, 2025
What to do if Yamaha Music Mixer shows M1 [ERR P02] POWER B OFF?
- R
  Ryan JensenAug 23, 2025
  If your Yamaha Music Mixer displays the error 'M1 [ERR P02] POWER B OFF', it indicates that power is not being supplied from power supply unit B. Make sure the power switch on power supply unit B is turned on, and that the power cord is connected to both the unit and power supply unit B.
L
Lauren WilliamsAug 26, 2025
What to do if Yamaha RIVAGE PM10 Music Mixer shows M1[ERR T12] TWINLANe T V B OP IP?
- K
  Kevin HartAug 26, 2025
  If the Yamaha Music Mixer displays the error 'M1[ERR T12] TWINLANe T V B OP IP', it means that the optical transceiver module is faulty. First, ensure that the cable is securely inserted. If the issue persists, use a commercially available cleaning tool for fiber optics to clean both ends of the cable and the connectors on the card. As a next step, try changing to a different cable. If the problem continues after trying these steps, have the unit checked by an authorized technician.
E
Emily DiazAug 28, 2025
What causes M1[ERR T0*] TWINLANe WRONG LOOP error on Yamaha RIVAGE PM10 Music Mixer?
- T
  Tanya MyersAug 28, 2025
  If your Yamaha Music Mixer displays the error 'M1[ERR T0*] TWINLANe WRONG LOOP', it indicates that the fiber optic cable is not connected properly. Check the cable connection to resolve this issue.
S
Samantha WilliamsAug 30, 2025
How to adjust screen brightness on Yamaha RIVAGE PM10?
- B
  brian42Aug 30, 2025
  If the indicators or LCD on the front panel of your Yamaha Music Mixer are too dark or too bright, you can adjust the brightness using the setting parameter accessed via the [MENU] key.
J
James CurrySep 1, 2025
What to do if Yamaha RIVAGE PM10 Music Mixer shows [ERR P01] POWER A OFF?
- M
  monicareynoldsSep 1, 2025
  If the Yamaha Music Mixer displays '[ERR P01] POWER A OFF', it means power is not being supplied from power supply unit A. To resolve this, ensure that the power switch on power supply unit A is turned on and that the power cord is properly connected to both the unit and power supply unit A.
R
robert90Sep 3, 2025
What to do if Yamaha Music Mixer shows [ERR P02] POWER B OFF?
- M
  mcbridemistySep 3, 2025
  If the Yamaha Music Mixer displays '[ERR P02] POWER B OFF', this indicates that power is not being supplied from power supply unit B. You should verify that the power switch on power supply unit B is turned on, and that the power cord is connected to the unit and power supply unit B.
J
Justin PowellSep 5, 2025
What to do if Yamaha RIVAGE PM10 Music Mixer shows [ERR T12] TWINLANe T V B OP IP?
- J
  Julie BakerSep 5, 2025
  If the Yamaha Music Mixer displays '[ERR T12] TWINLANe T V B OP IP', it indicates an error with the optical transceiver module on the HY256-TL. First, ensure the cable is securely inserted. If the issue persists, use a fiber optic cleaning tool to clean both ends of the cable and the connectors on the card. Try using a different cable. If these steps don't resolve the problem, have the unit checked by an authorized technician, although this error should not affect the unit's operation. Contact your Yamaha dealer for assistance.
H
halltinaSep 7, 2025
How to troubleshoot Yamaha RIVAGE PM10 when power does not turn on?
- G
  Gary QuinnSep 8, 2025
  If your Yamaha Music Mixer is not turning on, first ensure that all power switches are in the ON position. Also, check that the AC power cords are securely connected. If it still does not turn on, it is recommended to contact your Yamaha dealer for further assistance.

Yamaha RIVAGE PM10 Specifications

General

Type	Digital Mixing Console
Sampling Rate	96 kHz
Bit Depth	24-bit
Talkback	Yes
MADI	Yes
EQ Bands	4-band PEQ
Effects	Built-in Effects Processing
Word Clock	In/Out
Power	AC100-240V 50/60Hz
Processing	DSP
Touchscreen	Yes
Connectivity	Ethernet
Channels	144