RM Series Wireless Microphone System Reference Manual
2
In order to use the products, setup is required. Set up the products using the Web GUI “RM-WAP Device Manager”.
Prepare the following.
• Computer
• LAN cable
• PoE powered network switch
• RM-WAP
• RM-WCH (required for using the AUTO SETUP function)
• Microphones (RM-WOM, RM-WDR, RM-WGL or RM-WGS)
Starting RM-WAP Device Manager
1. Download the application “RM Device Finder” from the Yamaha website (U.S.A. and Canada:
https://uc.yamaha.com/support/, Other countries: https://download.yamaha.com/), and then start it.
2. Using a LAN cable, connect the computer to the network switch where the access point is connected.
3. Select a network in the [Select Network Interface Card] window, and then click [OK].
4. Double-click this unit in the [Detected Devices] window. Alternatively, select this unit, and then click the
[Browse] button.
The password settings window of RM-WAP Device Manager appears.
SETUP
To Next Page
Loading...
