Yamaha RMWAP8 - User Manual

English
3
RM-WAP-16 RM-WAP-8 Owner’s Manual
PLEASE READ CAREFULLY BEFORE PROCEEDING
Please keep this manual in a safe place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious
injury or even death from electrical shock, short-circuiting, damages, fire or other
hazards. These precautions include, but are not limited to, the following:
Fire warning
• Do not place any burning items or open flames near the product, since they may cause a fire.
Wireless unit
• Do not use this product near medical devices or inside medical facilities. Radio waves from
this product may affect electro-medical devices.
• Do not use this product within 15 cm (6 in) of persons with a heart pacemaker implant or a
defibrillator implant. Radio waves from this product may affect electro-medical devices, such
as a heart pacemaker implant or defibrillator implant.
Location
• Install in the manner instructed in the manual. Falling may result in injury or damage.
• Confirm that the finished installation is safe and secure. Also, carry out safety inspections
periodically. Failure to observe this may cause devices to fall and result in injury.
PRECAUTIONS
Yamaha cannot be held responsible for damage caused by improper use or modifications to the
product, or data that is lost or destroyed.
RM-WAP-16_RM-WAP-8_om_7multi_A0.book 3 ページ ２０２１年２月５日 金曜日 午後３時２８分

Summary

PRECAUTIONS

Safety Warnings

Essential safety precautions to prevent serious injury or death from hazards like electrical shock and fire.

Wireless Unit Safety

Precautions for using the product near medical devices or pacemakers due to radio wave interference.

Installation Location Safety

Guidelines for secure installation to prevent the unit from falling and causing injury or damage.

CAUTIONARY GUIDELINES

Handling Abnormalities and Water Exposure

Procedures for product abnormalities and cautions regarding water exposure and handling.

Installation and Connection Precautions

Precautions for safe installation, LAN cable connection, and placement to avoid hazards.

HANDLING AND MAINTENANCE

PRODUCT INFORMATION

Product Features and Manual Overview

Details on product functions, compatibility, open-source licenses, and an overview of manual signal words.

TRANSFER AND DISPOSAL

INTRODUCTION AND REFERENCES

Product Overview and Included Items

Welcome, product description, compatibility, and a list of included items.

Reference Manuals

Guidance on accessing the Reference Manual for detailed setup, functions, and specifications.

CONTROLS AND FUNCTIONS

Front Panel Controls

Description of front panel indicators (Power, Status) and the RESET button.

Rear Panel Controls

Description of the UNLOCK switch on the rear panel used for mounting bracket removal.

BOTTOM PANEL DETAILS

Ports and Mounting Features

Details on the Dante/PoE port, mounting cutouts, cable slots, and safety wire holes.

Heatsinks and Product Label

Information on heatsinks for heat dissipation and the product label with conformity marks.

INSTALLING ON A WALL OR CEILING - PART 1

Mounting Bracket Attachment

Instructions for attaching the mounting bracket to a wall or ceiling using screws, noting orientation.

INSTALLING ON A WALL OR CEILING - PART 2

LAN Cable Connection and Safety Wire

Steps for plugging in the LAN cable and attaching a safety wire.

Unit to Bracket Alignment

How to align the unit's hooks with the mounting bracket cutouts for secure attachment.

INSTALLING ON A WALL OR CEILING - PART 3

Securing the Unit

Final step to slide the unit to engage hooks, completing the installation. Includes note on removal.

MAIN SPECIFICATIONS

General and Network Specifications

Details on general specs (dimensions, power, environment) and network specs (Dante/PoE, cable requirements).

AUDIO SPECIFICATIONS

WIRELESS SPECIFICATIONS

DIMENSIONAL DIAGRAM (UNIT)

MOUNTING BRACKET DIMENSIONS

ENVIRONMENTAL AND REGULATORY INFORMATION

Disposal and Recycling Guidelines

Information for users on the collection and disposal of old equipment, including recycling.

Transmitter and RF Exposure Compliance

Statements on transmitter co-location, FCC, ISED, and licence-exempt device compliance and exposure limits.

COMPLIANCE INFORMATION

FCC Declaration and Notices

Supplier's declaration of conformity, FCC rules, and important notices regarding modifications and cable usage.

Yamaha RMWAP8 Specifications

General

Brand	Yamaha
Model	RMWAP8
Category	Microphone
Language	English