Need help?Do you have a question about the Yamaha RX-500U and is the answer not in the manual?
General| Tuning range | FM, MW |
|---|---|
| Frequency Response | 20Hz to 20kHz |
| Output | 150mV (line) |
| Total Harmonic Distortion | 0.015% |
| Input Sensitivity | 150mV (line) |
| Signal-to-Noise Ratio | 100dB (line) |
| Channel separation | 50dB (line) |
| Speaker load impedance | 4-16 ohms |
| Dimensions | 435 x 151 x 386mm (W x H x D) |
Technical specifications related to audio performance, power output, and input sensitivity.
Technical specifications for the FM tuner section, including sensitivity, selectivity, and signal-to-noise ratio.
Technical specifications for the AM tuner section, covering tuning range and sensitivity.
General specifications including power supply, power consumption, dimensions, and weight.
Verification of DC voltage levels at various test points after power-on.
Procedure to adjust idling current for power transistors using VR201 and VR202.
Detailed adjustment steps for the FM tuner, including discriminator balance, sensitivity, and separation.
Adjustment steps for the AM tuner, focusing on sensitivity and auto-search reception.
Procedures for confirming preset memory, tuning mode, and last channel memory operations.
Block diagram and pin functions for the LC6522C microcomputer.
List of electrical components with part numbers, descriptions, and model applicability.
To Next Page
