Why is there no sound from my Yamaha RX-V1600 Receiver subwoofer?
If you're not getting any sound from your subwoofer with your Yamaha Receiver, check these settings: If playing a Dolby Digital or DTS signal, ensure LFE/BASS OUT is set to SWFR or BOTH. If playing a 2-channel source, set LFE/BASS OUT to BOTH. Also, the source may not contain low bass signals.
Why does the sound suddenly go off on my Yamaha RX-V1600 Receiver?
If the sound on your Yamaha Receiver suddenly goes off, it could be due to a few reasons: The protection circuitry might have been activated due to a short circuit, so check the impedance selector setting. The sleep timer may have turned the unit off; turn the power back on and play the source again. The sound could be muted; press MUTE to cancel it.
What to do if my Yamaha RX-V1600 won't turn on?
If your Yamaha Receiver fails to turn on or enters standby mode shortly after being powered on, check the following: Ensure the power cable is firmly connected. Verify the impedance setting matches your speakers. Inspect speaker wire connections to ensure they are secure and not touching anything other than their respective connections. If the unit has been exposed to a strong electric shock, set it to standby mode, disconnect the power cable, wait 30 seconds, then plug it back in.
Why does Yamaha RX-V1600 Receiver sound suddenly go off?
If the sound on your Yamaha Receiver suddenly cuts off, consider the following: * The protection circuitry may have been activated due to a short circuit. Check that the impedance selector setting is correct and ensure speaker wires aren't touching. * The sleep timer might have turned the unit off. Turn the power back on and play the source again. * The sound could be muted. Press MUTE to cancel it.
Explains graphical symbols and general safety rules for operation and maintenance.
Covers safe installation, ventilation, heat, and environmental considerations.
Details risks of electric shock, fire hazards, and object/liquid entry.
Advises against self-servicing and outlines conditions requiring qualified service.
Includes FCC information for US customers and notes for CATV installers.
Details the 7-channel amplifier and various sound field processing features.
Describes the AM/FM tuner and XM Satellite Radio capabilities.
Explains HDMI connectivity and features like YPAO and OSD.
Lists included accessories and guides initial setup.
Provides instructions for installing batteries in remote controls.
Details proper handling of remote controls and accessing front panel controls.
Details the functions of the front panel buttons and display indicators.
Explains the buttons and operations of the main remote control.
Describes the functions of the remote control for Zone 2 and Zone 3.
Explains indicators 10-24 on the front panel display.
Guides on positioning front, center, surround, and presence speakers.
Details how to connect speakers to various terminals on the unit.
Describes cable types and jacks for connecting audio/video components.
Explains how to connect HDMI components for audio and video signals.
Details connecting MULTI CH INPUT and VIDEO AUX jacks.
Guides on connecting audio devices like CD recorders and turntables.
Instructions for connecting external amplifiers and antennas.
Covers AC power connection and speaker impedance adjustment.
Explains YPAO technology and how to set up the optimizer microphone.
Step-by-step instructions for running the automatic setup procedure.
Explains how to view and confirm the results of the AUTO SETUP procedure.
Covers turning on the unit, selecting speakers, input sources, and volume.
Adjusting bass/treble and muting the sound output.
Details SILENT CINEMA, PURE DIRECT, and night listening modes.
Enabling surround effects for 2-channel sources and selecting audio input modes.
Selecting multi-channel inputs and displaying source information.
Using the sleep timer and listening to unprocessed signals in STRAIGHT mode.
Covers basic recording steps, notes on source compatibility, and DTS software.
Guides for automatically and manually tuning FM/AM stations.
Instructions for automatically storing and customizing FM presets.
Details on manually storing preset stations.
Procedures for tuning to preset stations and exchanging their assignments.
Introduction to XM service and connecting the required antenna accessory.
Details controls on the unit and remote for XM Satellite Radio.
Explains remote control functions for XM in Zone 2/3.
Steps for activating XM service and selecting operating modes.
Guides on using All Channel, Category, and Preset search modes.
Procedures for direct channel entry and setting XM presets.
Shows how to display XM information on OSD and front panel.
Explains sound fields, early reflections, and reverberations.
Guide to changing factory preset sound field parameters.
Details on resetting parameters and memory backup.
Describes sound fields for movie/video sources (MULTI and 2-CH).
Describes sound fields for music sources (CD, FM/AM, tapes).
Diagrams showing speaker output for various sound field programs.
Details DSP LEVEL, Initial Delay, and Room Size parameters.
Explains Surround and Surround Back Liveness, Room Size, and Delay settings.
Covers Reverberation Time, Level, Delay, and Dialog Lift adjustments.
Lists parameters for 7ch Stereo, PLIIx Music, and Neo:6 Music modes.
Adjusts basic system parameters like speaker size and level.
Compensates for video delays and adjusts audio settings.
Reassigns digital I/O, selects input mode, renames inputs.
Adjusts optional system settings like display and XM radio.
Guide on navigating and adjusting parameters in Manual Setup.
Configures speaker size, LFE/Bass output, and subwoofer settings.
Sets up surround speakers, presence speakers, and crossover frequency.
Manually balances speaker levels and sets speaker distances/delays.
Adjusts THX settings, test tone, and graphic/parametric equalizer.
Customizes audio settings, HDMI support, muting, and tone bypass.
Assigns jacks, renames inputs, and configures coaxial/optical/HDMI.
Selects decoders, configures multi-channel input, and adjusts volume trim.
Adjusts OSD, display brightness, and video signal conversion.
Protects settings and designates default input/decoder modes.
Configures zone amplifier settings and speaker locations.
Adjusts XM Radio settings, fan mode, and tuner frequency step.
Switching OSD modes and manually adjusting speaker output levels.
Navigating and using the ADVANCED SETUP menu for customization.
Covers remote sensor, wake-on-access, fan mode, and bi-AMP settings.
How to control the main unit and other audio/video components.
Guides on setting AMP, Tuner, and XM remote control codes.
Programming remote control functions from other remotes.
Instructions for changing the names of input sources on the remote.
Using and programming macro functions for sequential operations.
Procedures for clearing learned functions, macros, and settings.
Details required equipment and connection methods for multi-room audio.
Guides on using internal or external amplifiers for Zone 2 and Zone 3 speakers.
How to select and control Zone 2 or Zone 3 from the front panel or remote.
Instructions for adjusting volume and tone settings for Zone 2 and Zone 3.
Explains HDMI technology, standards, and compatibility.
Guides on assigning HDMI inputs and converting analog video to HDMI.
Configures HDMI audio output and basic playback procedures.
Lists common problems, causes, remedies, and corresponding page references.
Troubleshooting specific problems with FM/AM tuning and XM radio.
Addresses issues with remote control functionality and AUTO SETUP errors.
Covers error messages related to HDMI components and video signals.
Defines audio formats (Dolby, DTS, PCM) and video signal types.
Explains terms like THX Cinema, SILENT CINEMA, and Adaptive Decorrelation.
Details Frequency, Gain, and Q factor parameters for YPAO EQ.
Details output power, sensitivity, distortion, and frequency response.
Covers video signal types, HDMI compatibility, and FM/AM tuner ranges.
Includes power supply, consumption, dimensions, and weight.
Details what is covered, not covered, and liability limitations.
Instructions on how to contact YAMAHA for service and repairs.
To Next Page
General
