Do you have a question about the Yamaha RX-V359 and is the answer not in the manual?
minimum RMS output power | 110 W |
---|---|
dynamic power | 120/140/160/180 W |
frequency response | 10 Hz to 100 kHz, –3 dB |
video signal type | NTSC |
---|---|
component signal level | 1 Vp-p/75 Ω |
signal to noise ratio | 50 dB or more |
tuning range | 87.5 to 107.9 MHz |
---|---|
50 dB quieting sensitivity | 2.8 µV (20.2 dBf) |
signal to noise ratio | 73 dB/70 dB |
power supply | 120 V AC, 60 Hz |
---|---|
power consumption | 240 W/320 VA |
standby power consumption | 0.5 W |
minimum RMS output power | 100 W |
---|---|
dynamic power | 105/135/165 W |
frequency response | 10 Hz to 100 kHz, –3 dB |
video signal type | PAL |
---|---|
component signal level | 1 Vp-p/75 Ω |
signal to noise ratio | 50 dB or more |
tuning range | 87.50 to 108.00 MHz |
---|---|
50 dB quieting sensitivity | 2.8 µV (20.2 dBf) |
signal to noise ratio | 73 dB/70 dB |
power supply | 110–120/220–240 V AC, 50/60 Hz |
---|---|
power consumption | 240 W |
standby power consumption | 0.7 W |
maximum output power | 105 W |
---|---|
frequency response | 10 Hz to 100 kHz, –3 dB |
total harmonic distortion | 0.06% or less |
video signal type | PAL |
---|---|
component signal level | 1 Vp-p/75 Ω |
signal to noise ratio | 50 dB or more |
power supply | 230 V AC, 50 Hz |
---|---|
power consumption | 240 W |
standby power consumption | 0.7 W |
maximum power | 110 W |
---|---|
frequency response | 10 Hz to 100 kHz, –3 dB |
total harmonic distortion | 0.06% or less |
video signal type | PAL |
---|---|
component signal level | 1 Vp-p/75 Ω |
signal to noise ratio | 50 dB or more |
power supply | 220 V AC, 50 Hz |
---|---|
power consumption | 240 W |
standby power consumption | 0.7 W |