Need help?Do you have a question about the Yamaha RX-V371BL and is the answer not in the manual?
General| Channels | 5.1 |
|---|---|
| Amplifier Type | Discrete |
| Power Output Impedance | 6 ohms |
| Frequency Response | 10 Hz - 100 kHz |
| Signal-to-Noise Ratio | 100 dB |
| HDMI Inputs | 4 |
| HDMI Outputs | 1 |
| Audio Formats | Dolby TrueHD, DTS-HD Master Audio |
| Network Capability | No |
| USB Port | Yes |
| iPod/iPhone compatibility | Yes |
| Ethernet Port | No |
| Bluetooth | No |
| Wi-Fi | No |
| Dimensions (W x H x D) | 435 x 151 x 315 mm |
| Input Sensitivity | 200 mV |
| Power Output | 100 W per channel (6 ohms, 1 kHz, 0.9% THD, 1 channel driven) |
Guide on how to connect front, center, surround, and subwoofer speakers.
Guide for performing automatic speaker parameter setup using YPAO.
Adjusting speaker settings like size, level, and distance.
Configuring HDMI control, ARC, input renaming, and auto-standby.
Solutions for problems like no power, standby mode, and errors.
Resolving HDMI connection errors and FM/AM reception issues.
Diagnosing connection and playback issues with iPod/iPhone and Bluetooth.
To Next Page
