Yamaha RX-V373 User Manual

PLAYBACK ➤ Configuring playback settings for different playback sources (Option menu) En 51
You can configure separate playback settings for different playback sources. This
menu is available on the front panel (or on the TV screen), allowing you to easily
configure settings during playback.
1
Press OPTION.
Front display
TV screen
2
Use the cursor keys to select an item and press ENTER.
• To return to the previous screen during menu operations, press RETURN.
3
Use the cursor keys (e/r) to select a setting.
4
To exit from the menu, press OPTION.
Option menu items
• Available items vary depending on the selected input source.
• Text in parentheses denotes indicators on the front display.
Configuring playback settings for different playback sources (Option menu)
VOL.
SW
C
LR
SL SR
ToneControl
OPTION
Tone Control
DSP/Surround
Volume Trim
Lipsync
Signal Info
Audio In
Option
Item Function Page
Tone Control (Tone Control)
Adjusts the high-frequency range and low-frequency
range of sounds.
52
DSP/Surround
(DSP/Surround)
DSP Level
(DSP Level)
Adjusts the sound field effect level. 52
Adaptive DRC
(A.DRC)
Sets whether the dynamic range (from maximum to
minimum) is automatically adjusted when the volume
is adjusted.
52
Enhancer
(Enhancer)
Enables/disables Compressed Music Enhancer. 52
Volume Trim
(Volume Trim)
Input Trim
(In.Trim)
Corrects volume differences between input sources. 52
Subwoofer Trim
(SW.Trim)
Fine-adjusts the subwoofer volume during playback. 53
Lipsync (Lipsync)
Enables/disables the “Lipsync” setting in the “Setup”
menu.
53
Signal Info (Signal Info) Displays information about the video/audio signal. 53
Audio In (Audio In)
Combines the video jack of the selected input
source with an audio jack of others.
53
Video Out (Video Out) Selects a video to be output with radio sounds. 53
Auto Preset (Auto Preset)
Automatically registers FM radio stations with strong
signals as presets.
41
Clear Preset (Clear Preset) Clear radio stations registered to preset numbers. 42
Traffic Program
(TrafficProgram)
(U.K. and Europe models only)
Automatically searches for a traffic information
station.
43
Repeat (Repeat)
Configures the repeat setting for the iPod (p.47) or
USB storage device (p.50).
—
Shuffle (Shuffle) Configures the shuffle setting for the iPod. 47

Yamaha RX-V373 Specifications

General

Frequency range	20 - 20000 Hz
RMS rated power	500 W
Output impedance	1200 Ω
Input sensitivity	200 mV
Audio output channels	5.1 channels
Signal-to-Noise Ratio (SNR)	100 dB
Dynamic power per channel (3 Ohm)	150 W
Dynamic power per channel (4 Ohm)	130 W
Power output per channel (1KHz@6 Ohm)	110 W
Power output per channel (20-20KHz@8 Ohm)	100 W
HDMI in	4
Line-in	Yes
PC in (D-Sub)	No
Audio (L/R) in	3
Remote (IR) input	1
S-Video inputs quantity	0
Multichannel audio input type	RCA
Component video (YPbPr/YCbCr) in	2
Headphone connectivity	3.5 mm
Connectivity technology	Wired
Speakers connectivity type	Banana connector/Binding posts
AM band range	530 - 1710 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Supported video modes	1080i, 1080p, 480i, 480p, 576i, 576p, 720p
Analog signal format system	NTSC, PAL
Display	VFD
HDMI version	1.3
Product color	Black
Audio decoders	Dolby TrueHD, DTS-HD
Volume control	Digital
Apple docking compatibility	iPhone, iPod
Receiver dimensions (WxDxH)	435 x 315 x 151 mm
On Screen Display (OSD) languages	CHI (SIMPL), DEU, ENG, ESP, FRE, RUS
AC input voltage	220-240 V
AC input frequency	50 - 60 Hz
Cables included	AC
Antenna type	BNC, Term.
Audio system	5.1
Channels quantity	6 channels
Power requirements	470 W
Remote control type	IR

Weight and Dimensions

Depth	315 mm
Width	435 mm
Height	151 mm
Weight	7500 g