Do you have a question about the Yamaha RX-V581 and is the answer not in the manual?
Receiver type | Surround |
---|---|
Output impedance | 6 Ω |
Pre-out channels | 2 SW |
Audio output channels | 7.2 channels |
Dynamic power per channel (4 Ohm) | 170 W |
Power output per channel (1KHz@6 Ohm) | 115 W |
Power output per channel (20-20KHz@8 Ohm) | - W |
Display | - |
Product color | Black |
Audio decoders | DTS-HD Master Audio, Dolby Digital Plus, Dolby Pro Logic IIx, Dolby TrueHD |
Apple docking compatibility | Not supported |
Digital Signal Processing (DSP) | Yes |
Headphone connectivity | 3.5 mm |
Number of HDMI outputs | 1 |
Digital audio optical out | 0 |
Connectivity technology | Wired & Wireless |
Speakers connectivity type | Banana connector |
Supported video modes | 2160p |
Supported graphics resolutions | 3840 x 2160 |
HDMI in | 4 |
Digital audio coaxial in | 2 |
Power consumption (standby) | 0.1 W |
Optical drive included | No |
Supported radio bands | AM, FM |
Internet radio services supported | Pandora, Spotify |
Audio formats supported | AAC, AIFF, ALAC, FLAC, MP3, WAV, WMA |
Depth | 327 mm |
---|---|
Width | 435 mm |
Height | 161 mm |
Weight | 8100 g |
Details on inserting batteries and operating range of the remote.
Guides on selecting speaker layouts and placing speakers in the room.
Provides diagrams and instructions for connecting speaker cables to the unit.
Details how to connect TVs and playback devices using various cables.
Explains the YPAO function for automatic speaker calibration.
Instructions for adding the unit to the MusicCast network.
General steps for turning on devices and selecting sources for playback.
Explains the SCENE function for one-touch input and setting selection.
Accesses the main setup menu for unit configuration.
Manual configuration of speaker size, distance, level, and other characteristics.
Settings for network connection, IP address, MAC filter, and standby.