What to do if my Yamaha Stereo Receiver displays 'CHECK ANTENNA'?
If your Yamaha Stereo Receiver displays 'CHECK ANTENNA', check that the XM antenna is securely connected to the XM Mini-Tuner Dock and inspect the antenna cable for damage. Replace the XM antenna if the cable is damaged.
Why is there no sound from center speaker Yamaha Stereo Receiver?
If you're not hearing sound from the center speaker on your Yamaha Stereo Receiver, ensure that 'CENTER SP' in 'SPEAKER SET' is set to 'SML' or 'LRG'. Also, try another sound field program, as some HiFi DSP programs (except for 7ch Stereo) may affect center speaker output.
Why is there no sound from surround speakers Yamaha Stereo Receiver?
If you are not getting any sound from the surround speakers connected to your Yamaha Stereo Receiver, check that 'SUR. L/R SP' in 'SPEAKER SET' is set to 'SML' or 'LRG'. Also, ensure that 'SUR.B L/R SP' in 'SPEAKER SET' is set to a setting other than 'NONE'. If you are using FRONT B speakers, make sure that 'FRONT B' in 'SPEAKER SET' is set to 'FRONT'.
What does 'UPDATING' mean on my Yamaha Stereo Receiver?
If your Yamaha Stereo Receiver displays 'UPDATING', wait until the updating is complete because the SiriusConnect tuner is updating the channel list.
Why does my Yamaha Stereo Receiver fail to turn on?
Your Yamaha Stereo Receiver might fail to turn on due to several reasons. Ensure the power cable is firmly connected. Check that the speaker impedance setting matches your speakers. Verify that all speaker wire connections are secure and not touching anything other than their respective connections. If the unit was exposed to a strong electric shock, set it to standby mode, disconnect the power cable, plug it back in after 30 seconds, and then use it normally.
What to do if my Yamaha Stereo Receiver suddenly goes off?
If the sound from your Yamaha Stereo Receiver suddenly cuts off, it might be due to a few reasons. The protection circuitry may have been activated due to a short circuit. Check that the impedance setting is correct and that the speaker wires are not touching each other, then turn the unit back on. Alternatively, the sleep timer may have turned off the unit; if so, turn the unit back on and play the source again. Finally, check if the sound is muted and, if so, press JMUTE or NVOLUME +/– to resume audio output.
What does 'ACQUIRING' mean on my Yamaha Stereo Receiver?
If your Yamaha Stereo Receiver displays 'ACQUIRING', adjust the orientation of the antenna of the SiriusConnect tuner because the signal is too weak.
What does 'CALL SIRIUS' mean on my Yamaha Stereo Receiver?
If your Yamaha Stereo Receiver displays 'CALL SIRIUS', contact SIRIUS Satellite Radio to subscribe the selected channel because the selected channel is not subscribed.
What does CHECK XM TUNER mean on my Yamaha Stereo Receiver?
If your Yamaha Stereo Receiver displays 'CHECK XM TUNER', confirm that the XM Mini-Tuner is fully seated in the dock and check that the XM Mini-Tuner Dock cable is connected to the unit.
Why is there a humming sound from my Yamaha Stereo Receiver?
A humming sound from your Yamaha Stereo Receiver could be due to incorrect cable connections. Ensure the audio cables are firmly connected; if the problem persists, the cables may be defective.
General| Impedance | 4 Ω |
|---|---|
| RMS rated power | 630 W |
| Audio output channels | 7.1 channels |
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Total Harmonic Distortion (THD) | 0.08 % |
| Equalizer | Yes |
| Product color | Black |
| Supported radio bands | AM, FM |
| Connectivity technology | Wired |
| Dimensions (WxDxH) | 435 x 151 x 352 mm |
| Power consumption (typical) | 490 W |
Weight and Dimensions| Weight | 9000 g |
|---|
Explains symbols and lists essential safety guidelines for operation.
Illustrates proper grounding for outdoor antenna systems.
Details FCC compliance and interference resolution.
Critical warnings regarding exposure to moisture and electrical hazards.
Notices for Canadian customers and serial number recording.
Overview of unit features, initial setup steps, and quick start guide.
Details on speaker placement, component connectivity, and terminal identification.
Guides on speaker placement and listening room optimization using AUTO SETUP.
Explains amplifier, DSP circuits, and audio decoders.
Details radio tuners, HDMI, and dock terminal capabilities.
Lists included accessories and guide for installing remote batteries.
Instructions for setting the unit's voltage selector before powering on.
Checklist of items and initial speaker setup instructions.
Steps for connecting components and using the SCENE button.
Identifies various audio, video, and digital input/output jacks.
Identifies speaker, dock, antenna, and other terminals.
Recommendations for optimal placement of main speakers.
Guidance on positioning the subwoofer for best bass response.
Cautions and instructions for connecting speaker wires correctly.
Information on using the FRONT B terminals for alternate speakers.
Instructions for setting up bi-amplification for speakers.
Guide on using banana plugs for speaker connections.
Explains analog, coaxial digital, and optical digital audio jacks.
Explains composite, S-video, and component video jacks.
Information on HDMI version, HDCP, and compatibility.
Guidelines for connecting HDMI jacks and cables.
Illustrates how audio and video signals travel through the unit.
How to connect the unit's video outputs to display devices.
Important considerations for video connection issues.
Detailed diagram for connecting a DVD player's outputs.
Explains settings related to converting video signals.
How to connect CD players and recorders for audio playback.
Guides for connecting multi-format players or external decoders.
Instructions for connecting iPod and Bluetooth adapters via dock terminal.
How to route remote control signals for external components.
Connecting game consoles or video cameras to front jacks.
Guidance on connecting supplied indoor antennas.
How to adjust speaker impedance settings for compatibility.
Procedures for powering the unit on and setting to standby mode.
Explains indicators for input sources and audio decoders.
Explains indicators for tuners, muting, volume, and system status.
Explains indicators related to sound fields and information displays.
Basic operation guide for the remote control.
Explains the YPAO technology and AUTO SETUP process.
Steps and checks required before starting the automatic setup.
How to choose setup methods and initiate the process.
Details what the system checks during the automatic setup.
How to view detailed results for connection, distance, and level.
Explains SP, DIST, and LVL readings in the results.
Options to SET or CANCEL the setup results.
How to resolve warning and error messages during setup.
Steps to select desired templates and assign them to SCENE buttons.
How SCENE buttons operate and indicate status.
A chart mapping source types to available SCENE templates.
Information on creating personalized SCENE templates.
Detailed descriptions of each preset SCENE template's function.
How to modify existing SCENE templates with custom settings.
Procedure for renaming custom SCENE templates.
Using the remote to control source components with SCENE.
How to set input sources for custom SCENE templates remotely.
Steps to select sources and control volume for playback.
How to choose and apply sound field programs.
Switching between different audio input jacks for a source.
Using multi-channel inputs for discrete audio sources.
How to view the unit's current operating status via OSD.
Connecting headphones and using the mute function.
Combining video from one source with audio from another.
Viewing details about the current input signal format.
How to automatically turn off the unit after a set time.
Explains various sound field programs like CINEMA DSP, MUSIC, MOVIE.
Advice on selecting programs based on listening preference.
How to use standard decoders for multi-channel playback.
Using DSP without surround speakers and straight decoding.
How to fine-tune parameters for DSP programs.
Activating DIRECT mode for minimal signal path processing.
Controlling bass and treble for front speakers.
Fine-tuning the volume level for each individual speaker.
Using CINEMA and MUSIC night modes for low-volume listening.
Step-by-step guide for automatic station tuning.
Step-by-step guide for manual station tuning.
How to automatically store FM stations into presets.
How to manually store stations into presets.
How to recall stored stations using preset numbers.
Procedure to swap assignments between two preset stations.
General information about XM Radio and legal disclaimers.
Instructions for physically connecting the XM tuner dock.
Steps to activate the XM Radio subscription service.
Instructions on how to locate the XM Radio ID number.
How to select XM as the input source for tuning.
Lists the different modes for searching XM channels.
Detailed instructions for searching channels by category or preset.
How to tune to channels by entering the channel number directly.
How to store and recall favorite XM channels.
Viewing channel information on the front panel or OSD.
General information about SIRIUS Radio and legal notices.
Instructions for physically connecting the SIRIUS tuner.
Steps to activate the SIRIUS Radio subscription service.
Instructions on how to find the SIRIUS tuner ID number.
How to select SIRIUS as the input source for tuning.
Lists the different modes for searching SIRIUS channels.
Detailed instructions for searching channels by category or preset.
How to tune to channels by entering the channel number directly.
How to store and recall favorite SIRIUS channels.
How to set, change, or reset the parental lock code.
Information on supported iPod models and general usage notes.
Basic operations for controlling the iPod using the unit's remote.
Detailed functions of remote buttons for iPod menu navigation.
Alternative method for controlling iPod without OSD.
Navigating iPod menus and viewing playback details on OSD.
Setting shuffle and repeat functions for iPod playback.
Explains the process of pairing Bluetooth devices with the adapter.
A simplified method for pairing Bluetooth components.
How to play audio from a paired Bluetooth device.
Important considerations and restrictions for recording.
Steps for performing test recordings and actual recording.
Introduction to automatic and manual system setup menus.
Details parameters for adjusting speaker settings and audio.
Adjusting speaker size settings (SMALL/LARGE/NONE).
Configuring surround back speaker size and type.
Setting LFE output and speaker crossover frequencies.
How to switch the subwoofer phase for better bass.
Manually setting speaker output levels and distances.
Adjusting the center channel's tonal quality with EQ.
Adjusting dynamic range compression for Dolby Digital/DTS.
Configuring mute function and audio delay for synchronization.
Choosing where HDMI audio signals are played back.
Designating decoder modes for multi-channel playback.
Reassigning and renaming input jacks for connected components.
Setting default decoder modes and multi-channel input configuration.
Setting DTS priority and background video source for multi-channel inputs.
Choosing the number of channels for multi-channel input.
Adjusting display brightness, scroll, and OSD position.
Enabling or disabling video signal conversion.
Preventing accidental changes to settings and parameters.
Resetting sound field parameters to factory defaults.
Pairing Bluetooth devices and checking antenna status.
Setting the code number for locking SIRIUS channels.
Basic operations for controlling the main unit using the remote.
How to use the remote to control a connected TV.
Shows button functions for controlling various external components.
Lists default remote control codes for various manufacturers.
Procedure for programming the remote with custom codes.
Explains the Zone 2 feature for separate audio zones.
Lists required equipment and connection methods for Zone 2.
Explains available Zone 2 operations and how to activate it.
How to power on and operate Zone 2 using front panel controls.
Using the remote to select input sources and control Zone 2.
Procedures for putting Zone 2 into standby mode.
Setting speaker impedance and resetting SIRIUS Parental Lock.
How to enable or disable the bi-amplifier function.
Configuring remote signal output for SCENE and tuner frequency steps.
Resetting all unit parameters to their default factory settings.
Solutions for power-on issues and immediate standby mode.
Troubleshooting steps for sound output problems.
Diagnosing sound problems affecting individual speakers.
Solutions for noise, distortion, and weak signals in FM/AM tuning.
Resolving problems with digital audio playback and HDMI components.
Solutions for speaker wiring faults, interference, and incorrect inputs.
Addressing weak tuner signals and lost preset stations.
Troubleshooting XM Radio status messages and connection errors.
Resolving XM signal reception and channel availability problems.
Solutions for SIRIUS Radio error messages and connection problems.
Troubleshooting SIRIUS connection and remote control malfunctions.
How to perform a full system reset to factory settings.
Explains common error messages during AUTO SETUP and their causes.
How to interpret and address warning messages from AUTO SETUP.
Resolving issues with iPod connection, recognition, and playback.
Explains status messages related to Bluetooth pairing and connection.
Definitions of bi-amplification, CINEMA DSP, component, and composite video.
Explains Dolby Digital, EX, Pro Logic II, and Neo:6 technologies.
Definitions of Neural Surround, PCM, and sampling frequency concepts.
Explains Dolby Surround and DTS digital surround formats.
Definition and function of the HDMI interface.
Explains LFE channel, Neo:6 decoding, and Neural Surround processing.
Explains SILENT CINEMA for headphones and Virtual CINEMA DSP.
Details the S-video signal system for video transmission.
Technical details for audio output, frequency response, and video signals.
Technical details for FM/AM tuners, power, and dimensions.
Identifies all controls and indicators on the front panel by letter.
Identifies all buttons on the remote control by number.
Lists codes for Blu-ray, CD, DVD players, recorders, TVs, and tuners.
Extensive list of remote control codes for different manufacturers.
Details incorrect steps for setting the SIRIUS Parental Lock.
Step-by-step guide for correctly setting the SIRIUS Parental Lock.
Details what the warranty covers and what it does not.
How to obtain warranty service and limitations on implied warranties.
To Next Page
