To Next PageTo Next PageWhy am I hearing a humming sound from my Yamaha RX-V863?
If you're hearing a humming sound from your Yamaha Stereo System, it could be due to incorrect cable connections. Ensure that all audio cables are firmly connected; if the problem continues, the cables may be defective. Also, if you're using a turntable, make sure it's connected to the GND terminal.
How to enable surround sound on Yamaha RX-V863 Stereo System?
If you're not hearing any sound from the surround speakers on your Yamaha Stereo System, the sound field programs might be turned off. Press OSTRAIGHT to turn them on.
What to do if the sound suddenly goes off on my Yamaha RX-V863?
If the sound suddenly goes off on your Yamaha Stereo System, it may be due to the activation of the protection circuitry, possibly caused by a short circuit. Check that the speaker impedance setting is correct.
Why is sound only coming from one speaker on my Yamaha RX-V863 Stereo System?
If you are only hearing sound from one side of your Yamaha Stereo System, there could be a few reasons. First, check if the sleep timer has turned the unit off; if so, turn it back on and play the source again. Ensure that all cable connections are correct, and if the problem continues, the cables may be defective. Finally, verify that the 'SP LEVEL' settings are correctly adjusted.
Why does my Yamaha RX-V863 only output sound from the center speaker?
If you only hear substantial sound from the center speaker on your Yamaha Stereo System, it could be because you're playing a monaural source with a sound field program. In this setup, the source signal is directed to the center channel, while the front and surround speakers output effect sounds. Try using a different sound field program to see if that resolves the issue.
How to improve AM radio tuning on Yamaha RX-V863 Stereo System?
If you cannot tune into the desired station with the automatic tuning method on your Yamaha Stereo System, the signal may be weak, or the antenna connections might be loose. Tighten the AM loop antenna connections and orient the antenna for the best reception.
Why can't my Yamaha RX-V863 find the radio station I want?
If you can't tune into the desired station using the automatic tuning method on your Yamaha Stereo System, the signal may be too weak. Try using a high-quality directional FM antenna.
Why did my Yamaha RX-V863 lose its preset radio stations?
If previously preset stations can no longer be tuned into on your Yamaha Stereo System, it's possible the unit was disconnected for a long period. Preset the stations again.
How to enable Dolby Digital or DTS on Yamaha RX-V863?
If your Yamaha Stereo System isn't playing Dolby Digital or DTS sources (the Dolby Digital or DTS indicator on the front panel display doesn't light up), the connected component might not be set to output Dolby Digital or DTS digital signals. Set Audio input jack select to 'AUTO'.
How to activate FRONT B speakers on Yamaha RX-V863 Stereo System?
If you cannot activate FRONT B speakers on your Yamaha Stereo System, it is likely that 'EXTRA SP ASSIGN' is set to a setting other than 'FRONT B'. Set 'EXTRA SP ASSIGN' to 'FRONT B'.
General| Brand | Yamaha |
|---|---|
| Model | RX-V863 |
| Category | Stereo System |
| Language | English |
Explains symbols used for warnings and instructions in the manual.
Lists crucial safety precautions for operation, cleaning, and maintenance.
Lists general operating advice, placement, and handling instructions.
Warning to reduce risk of fire or electric shock.
Specific safety/compliance notes for Canadian users.
Prompts user to record serial number.
Details the amplifier's power output specifications.
Describes SCENE function and sound field technologies.
Lists HDMI features and dock terminal capabilities.
Lists all items included in the product package.
Provides information on manual symbols, operation methods, and design changes.
Lists various product and technology trademarks.
Advises avoiding prolonged exposure to excessive volume levels.
Step-by-step guide for inserting batteries into the remote.
Instructions for setting the voltage selector on the rear panel.
Covers checking components, speaker setup, and initial connections.
Guides on using SCENE 1 for initial playback.
Details SCENE customization, input sources, sound features, and parameters.
Lists further optional functionalities of the unit.
Diagram and list of rear panel connection terminals.
Explains various rear panel connection terminals and their functions.
Guides on speaker placement for different channel configurations.
Instructions for connecting and configuring presence speakers.
Details on connecting speakers for a 7.1 setup.
Options for connecting alternative speakers to EXTRA SP terminals.
Guides on connecting speaker cables (bare wire/banana plug).
Instructions for setting up bi-amplification connections.
Explains different types of audio jacks and their cable connections.
Explains different types of video jacks and their cable connections.
Lists compatible audio and video signal formats for HDMI.
Diagram and notes for connecting HDMI devices.
Diagrams illustrating audio and video signal processing paths.
Guides on connecting TVs/projectors via HDMI, Component, S-Video, Video.
Details on connecting DVD players to the unit.
Guides for connecting DVD recorders, PVRs, VCRs, and set-top boxes.
Guides on connecting turntables, CD recorders, MD recorders, etc.
Instructions for connecting external amplifiers to PRE OUT jacks.
Connecting for discrete multi-channel input.
Guides on connecting iPod docks and Bluetooth adapters.
Connecting components for remote control signal transmission.
Connecting game consoles or video cameras to front panel jacks.
Instructions for connecting the supplied FM and AM antennas.
Step-by-step guide for connecting the power cable.
Instructions for setting speaker impedance for 6 ohm speakers.
Steps to turn on the unit and its main zone.
Instructions for setting the main zone to standby mode.
Explains the function of various indicators on the front panel.
Describes input source, decoder, and sound field indicators.
Explains remote control sensor and operation modes.
Provides important usage notes and conditions for the remote control.
Guides on using the automatic speaker setup procedure.
Selects function for speakers connected to EXTRA SP terminals.
Guides on selecting setup options like AUTO, RELOAD, UNDO.
Selects parametric equalizer type (NATURAL, FLAT, FRONT).
Steps to start the auto setup measurement.
Explains SP, DIST, LVL results from auto setup.
Guides on understanding and addressing warning messages.
Displays detailed setup results (WIRING, DISTANCE, SIZE, EQ, LEVEL).
Confirms or cancels the AUTO SETUP results.
Procedures for handling errors like USER CANCEL or INTERNAL ERROR.
Guides on understanding warning messages like OUT OF PHASE or LEVEL ERROR.
How to assign preset SCENE templates to buttons.
Steps for creating and assigning custom SCENE templates.
Chart mapping sources to SCENE templates for playback.
Details of default SCENE templates for various sources.
Guides on creating original SCENE templates by adjusting parameters.
Procedures for renaming customized SCENE templates.
Operating connected source components using the remote in SCENE mode.
Configuring the remote to control customized SCENE sources.
Covers turning on monitor, selecting source, adjusting volume, selecting sound field.
Turning FRONT A/B speakers on/off.
Using speakers in another room via Zone B feature.
Selecting input jacks when multiple are assigned to a source.
How to view unit status via OSD on a video monitor.
Instructions for connecting and using headphones.
How to mute the audio output and resume it.
Combining video from one source with audio from another.
Viewing current input signal audio and video information.
Setting the unit to turn off automatically after a set time.
How to use the Straight decoding mode for unprocessed sound.
Guides on how to select available sound field programs.
Detailed descriptions of sound fields for classical music.
Descriptions of sound fields for live, club, and entertainment sources.
Descriptions of sound fields tailored for movie playback.
Descriptions for stereo playback and music enhancer features.
Explains surround decode modes for enhanced channel output.
Enjoying DSP sound fields without surround speakers.
Using sound field programs with headphones for immersive sound.
Manually adjusting the output level of each speaker.
Using Pure Direct mode for high-fidelity sound reproduction.
Adjusting bass and treble for front left and right channels.
Explains automatic, manual, and preset tuning modes.
Method to tune directly to a desired station frequency.
Recalling stored FM/AM stations using preset numbers.
Detailed steps for direct frequency tuning.
Automatically stores strong FM/AM stations.
Manually stores AM/FM stations with weak signals.
Swapping assignments of two preset stations.
Selects one of 8 HD Radio audio programs (HD1-HD8).
Displays HD Radio info on the front panel display.
Displays HD Radio info on the video monitor via OSD.
Instructions for connecting the XM Mini-Tuner Dock.
Steps to subscribe and activate XM service.
Guides on searching for XM channels.
Covers All Channel, Category, Preset, and Direct Number search modes.
Stores selected XM channels as presets.
Shows XM Radio info on the front panel display.
Displays XM Radio info on the OSD.
Instructions for connecting the SiriusConnect tuner.
Steps to activate a SIRIUS Satellite Radio subscription.
Guides on searching for SIRIUS channels.
Shows the Sirius ID for tuner identification.
Stores selected SIRIUS channels as presets.
Sets Parental Lock code and locks specific channels.
How to access locked SIRIUS channels.
Displays SIRIUS Radio info on the front panel.
Displays SIRIUS Radio info on the OSD.
Explains remote control and simple mode operations for iPod.
Browsing iPod content (playlists, artists, songs) via OSD.
Controls for random playback and song repetition.
Details shown during iPod playback (track, artist, time).
Steps for pairing Bluetooth adapter and component.
Playing audio from a Bluetooth component.
Steps for recording audio and video sources.
Adjusting parameters like DSP LEVEL and DIALG.LIFT.
Adjusts the level of effect sounds in sound field programs.
Adjusts the vertical position of dialogue in movies.
Adjusts initial delay for presence, surround, and back speakers.
Adjusts the apparent size of the surround sound field.
Adjusts reflectivity of virtual walls for sound field liveness.
Adjusts reverberation time, delay, and level.
Bypasses decoders for pure hi-fi stereo sound.
Adjusts volume levels for center, surround, back, and presence speakers.
Adjusts effect level for Straight Enhancer and 7ch Enhancer.
Selects decoders for movie sound field programs.
Plays back 2-channel sources with selected decoders.
Adjusts panorama, dimension, and center width for PLIIx/PLII.
Adjusts C. IMAGE, FOCUS, and TruBass parameters.
Covers speaker set, level, distance, and test tone settings.
Details EXTRA SP, LFE/BASS, speaker sizes, crossover, phase.
Selects speakers for LFE and low-frequency signal output.
Configures speaker assignments, sizes, and crossover.
Adjusts front and center speaker size and placement logic.
Adjusts surround and surround back speaker size and channel routing.
Selects crossover frequency for speakers set to SMALL.
Switches subwoofer phase to improve bass response.
Manually balances speaker levels relative to each other.
Manually adjusts speaker distance and delay.
Turns test tone output on/off for setup settings.
Adjusts dynamic range compression for speakers/headphones.
Sets mute type, max volume, and initial volume.
Selects equalizer type (AUTO PEQ, GEQ) and adjusts graphic equalizer.
Adjusts output level of LFE channel for speakers and headphones.
Adjusts dynamic range compression for speakers/headphones.
Adjusts audio/video timing for HDMI sources.
Enables 6.1/7.1 playback using surround back speakers.
Assigns input/output jacks to components.
Changes input source names and trims input signal levels.
Sets default decoder mode and iPod standby charge.
Manages Bluetooth pairing and input channel settings.
Renames input sources and trims signal levels.
Sets default decoder mode and SIRIUS parental lock.
Selects whether iPod charges in standby mode.
Steps for pairing Bluetooth adapter with components.
Configures multi-channel inputs and background video source.
Adjusts front panel brightness, OSD position, and display times.
Controls video conversion and HDMI up-scaling settings.
Sets HDMI up-scaling resolution for analog video signals.
Adjusts aspect ratio for analog video signals output via HDMI.
Prevents accidental changes to system settings.
Sets default audio input select, decoders, and extended surround.
Selects where HDMI audio signals are played back.
Sets maximum and initial volume levels for Zone 2.
How to control the unit using the remote.
How to control a TV using the remote.
Details remote button functions for various components.
Lists default remote control codes for various input sources.
Steps to set specific remote control codes for components.
Clears and resets all remote control codes to initial factory settings.
Lists required equipment for multi-zone audio setup.
Guides on connecting an external amplifier for Zone 2 audio.
Instructions for using the unit's amplifier for Zone 2 speakers.
Steps to control Zone 2 using the unit's front panel buttons.
Procedures to activate Zone 2 operation mode.
Selecting input sources for Zone 2 operation.
Configuring the remote control for Zone 2 operation.
Accessing and navigating the advanced setup menu.
Setting speaker impedance to match speakers (8 Ohm or 6 Ohm).
Setting the AMP ID for remote control recognition.
Setting the TUNER ID for remote control recognition.
Setting the XM ID for remote control recognition.
Setting the SIRIUS ID for remote control recognition.
Resets the SIRIUS Parental Lock PIN to the factory setting.
Activating bi-amplifier function and SCENE IR code setting.
Settings for monitor check, tuner step, and parameter initialization.
Addresses problems like no power, no sound, no picture, and standby mode.
Troubleshoots issues with center, surround, presence, and subwoofer sound.
Addresses problems with Dolby/DTS playback and humming sounds.
Troubleshoots no picture/sound and HDCP authentication failures.
Addresses issues with FM/AM reception and tuning.
Troubleshoots problems with receiving HD Radio signals and information.
Explains common XM Radio status messages and their remedies.
Explains common SIRIUS Radio status messages and their remedies.
Addresses issues with remote control operation and code settings.
Troubleshoots problems with iPod connection and playback.
Addresses Bluetooth pairing and connection errors.
Lists errors occurring before AUTO SETUP starts.
Lists errors occurring during the AUTO SETUP process.
Explains warnings that may appear after AUTO SETUP completion.
Steps to reset all unit parameters to initial factory settings.
Defines lip sync and bi-amplification connection.
Defines component, composite, and deep color video signals.
Defines Dolby Digital, EX, Plus, Pro Logic II, and IIx.
Defines DTS 96/24, DTS Digital Surround, DTS Express, DTS-HD.
Defines DSD and PCM audio signal formats.
Defines x.v.Color and HDMI interface.
Explains early reflections and reverberations in sound fields.
Explains Yamaha's CINEMA DSP technology for movie sound.
Describes SILENT CINEMA, Virtual CINEMA DSP, and Compressed Music Enhancer.
Details amplifier power, sensitivity, SNR, and distortion specs.
Lists video formats, tuning ranges, and signal levels.
Specifies power supply, consumption, and standby power.
Lists unit dimensions and weight.
Diagram identifying buttons and indicators on the front panel.
Diagram identifying all buttons on the remote control.
Lists remote codes for TVs, PVRs, and satellite receivers.
Lists remote codes for DVD players, CD players, tuners, etc.
