Yamaha RX-V867 - User Manual

Questions and Answers

S
shari97Aug 8, 2025
Why is my Yamaha RX-V867 Receiver remote control not working?
- L
  laneterryAug 8, 2025
  Your Yamaha Receiver's remote control might not be working due to several reasons. First, ensure you are within the operational range of 20 ft (6 m) and within a 30-degree angle from the front panel. Also, strong light sources like direct sunlight or fluorescent lamps can interfere with the remote control sensor. Try adjusting the lighting or repositioning the Yamaha Receiver. Weak batteries can also cause the remote to malfunction; replace all batteries to resolve this. Finally, verify that the remote control ID matches the Yamaha Receiver's ID and adjust if necessary.
D
Dennis ClarkAug 17, 2025
What to do if Yamaha RX-V867 Receiver remote control is not working?
- L
  lawsonmichaelAug 17, 2025
  If the Yamaha Receiver remote control isn't working, start by checking the batteries and replacing them if they're weak. Ensure that you are within 20 ft (6 m) and 30 degrees of the front panel for the remote to function correctly. Also, check for any direct sunlight or strong lighting that may be interfering with the remote sensor; adjust the lighting or move the Yamaha Receiver. Finally, make sure the remote control ID matches the ID of the Yamaha Receiver.
K
kthomasAug 27, 2025
How to fix Yamaha Receiver remote control?
- R
  robyncarterAug 27, 2025
  To fix a Yamaha Receiver remote that isn't working, try the following: 1. Replace the batteries. 2. Make sure you're within 20 ft (6 m) and 30 degrees of the receiver. 3. Adjust lighting or move the receiver to avoid interference with the remote sensor. 4. Check and match the remote control ID with the receiver's ID.