Yamaha RX-V4A User Manual

[PDF] Setup Bluetooth On Yamaha Receiver Of 2022 - Wiki FAQ
1
Setup Bluetooth On Yamaha Receiver Of
2022 - Wiki FAQ
[PDF] Update: 18 Oct 2022.
How do I reset my Yamaha RX V4A " Unplug your receiver Unplug your receiver's power cord from the
electrical outlet wait 15 seconds and plug it back in. Press the Power button on the front panel of your
receiver. Wait for your receiver to reboot. ".
Why is Bluetooth not finding devices?
How do I connect my iPhone to my stereo via Bluetooth "It's usually because the device's own1.
Bluetooth is switched off or isn't in pairing mode;
Check the user manual to find out how to make it discoverable by turning on pairing mode;2.
With some headphones it's a case of holding the power button down for longer but with other devices3.
there's a dedicated Bluetooth button;
";4.
How do I turn on pairing mode?
Why is my Bluetooth device not pairing.
Which is better PCM or auto?
Is PCM surround sound "PCM is better for TV speakers while Auto is better for
external speakers or home theater setups. PCM sends uncompressed audio in
the stereo (two-channel) track while Auto generally uses Dolby Digital tracks
wherein the audio is compressed and sent through a multi-channel track. ".
Where is the connect button on my Yamaha receiver?
How do I find the IP address of my Yamaha receiver without the remote.
How do I connect my iPad to my stereo receiver?
How do I connect my iphone to my Yamaha receiver "To connect your iPhone
iPad or iPod to your home stereo you just need a 3. The RCA cable plugs into the
rear of your stereo and the 3. ".

Yamaha RX-V4A Specifications

General

Channels	5.2
HDMI Inputs	4
HDMI Outputs	1
HDMI Version	2.1
HDMI eARC	Yes
HDMI CEC	Yes
Digital Audio Input/Output (Coaxial)	1 / 0
Phono Input	No
Subwoofer Output	2
Speaker Output	5
4K Ultra HD Pass-through and Upscaling	Yes
Dolby Vision Compatible	Yes
HDR10+	Yes
Wi-Fi	Yes
AirPlay 2	Yes
Bluetooth	Yes (SBC / AAC)
Spotify Connect	Yes
MusicCast	Yes
Ethernet Port	Yes
Weight	8.8 kg
Power Output per Channel	80 W (8 ohms, 20 Hz-20 kHz, 0.06% THD, 2 ch driven)
USB Input	1
Digital Audio Input/Output (Optical)	1 In
Analog Audio Input/Output	3 In / 1 Out
HDR Support	Yes (HDR10, HLG)
Dimensions (W x H x D)	435 x 171 x 377 mm
Maximum Effective Output Power (1kHz, 1ch driven)	145 W (6 ohms, 1 kHz, 10% THD)