Yamaha RX-V467 User Manual (English)

Other manuals for Yamaha RX-V467

Service Manual137 pages

Update5 pages

Questions and Answers:

S
Sandra LawrenceJul 26, 2025
Why is my Yamaha RX-V467 Receiver remote control not working?
- M
  Mrs. Linda OlsonJul 26, 2025
  Your Yamaha Receiver remote might not be working due to several reasons: you may be too far away or at the wrong angle (the remote works up to 6 m / 20 ft and within 30 degrees of the front panel), direct sunlight or certain lighting might be interfering with the sensor (try adjusting the lighting or moving the unit), the batteries might be weak (replace them), or the remote control ID might not match the receiver's ID (ensure they match).
M
Michael AndersonAug 3, 2025
What to do if my Yamaha RX-V467 Receiver remote control is not functioning properly?
- S
  Stanley AllenAug 3, 2025
  If your Yamaha Receiver remote isn't functioning properly, consider these potential causes and solutions: ensure you're within 6 m / 20 ft and 30 degrees of the front panel. Adjust lighting to avoid direct sunlight on the receiver's sensor, or relocate the unit. Replace the remote's batteries. Also, verify that the remote control ID matches the receiver's.
R
Rachel SalasAug 9, 2025
How to fix a Yamaha Receiver remote control that isn't working?
- R
  Robert SotoAug 9, 2025
  To fix a Yamaha Receiver remote that isn't working, try these steps: Make sure you are within the operational range (6 m / 20 ft and 30 degrees from the front panel). Adjust the lighting to prevent interference with the remote sensor, or move the unit. Replace the batteries in the remote. Check that the remote control ID matches the receiver's ID.
J
James StephensAug 18, 2025
What to do if external components cannot be controlled by Yamaha Receiver remote?
- S
  sarahwilliamsAug 18, 2025
  If you can't control external components with your Yamaha Receiver remote, it might be due to the remote control code not being set correctly. Set the correct remote control code using 'Remote control code search' on the CD-ROM. Alternatively, try setting another code for the same manufacturer using the CD-ROM. Also, even if the remote control code is correctly set, some models might not respond to the remote control.

Yamaha RX-V467 Specifications

General

Audio output channels	5.1 channels
Signal-to-Noise Ratio (SNR)	100 dB
Total Harmonic Distortion (THD)	0.06 %
HDMI	Yes
Output power	600 W
Dimensions (WxDxH)	435 x 364 x 151 mm
HDMI ports quantity	5
Output power description	5 x 120 W/ch
Digital audio optical in	2
Product color	Black
Power consumption (standby)	0.2 W
Power consumption (typical)	280 W