EasyManua.ls Logo

Yamaha RX-V800RDS - User Manual

Yamaha RX-V800RDS
83 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
Printed in Malaysia ID
V624940
RX-V800RDS
Natural Sound AV Receiver
Ampli-tuner audio-vidéo
G B
RX-V800RDS
OWNER’S MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
BRUKSANVISNING
MANUALE DI ISTRUZIONI
MANUAL DE INSTRUCCIONES
GEBRUIKSAANWIJZING
0100V800RDS(GB)-cv1/4 8/29/0, 10:02 AM1

Table of Contents

Questions and Answers

  • J
    Jamie GarrisonAug 20, 2025
    What to do if my Yamaha RX-V800RDS fails to turn on?
    • I
      Ian MosleyAug 20, 2025
      First, ensure the power cord is firmly connected to both the receiver and the outlet. Next, check that the IMPEDANCE SELECTOR switch on the rear panel is fully set to either the left or right position while the unit is in standby mode. Finally, verify that all speaker wire connections are secure and that no wires are touching anything other than their respective connections, as the protection circuitry may have been activated.
  • K
    Kyle JordanAug 21, 2025
    What to do if Yamaha Receiver remote control does not work?
    • A
      Anthony BauerAug 22, 2025
      Ensure that you are within a 6 m (20 feet) range and no more than 30 degrees off-axis from the front panel of the Yamaha Receiver. Also, try replacing all the batteries in the remote control with new ones.
  • K
    Karen BergAug 25, 2025
    How to fix Yamaha RX-V800RDS when sound suddenly goes off?
    • M
      Maurice GilmoreAug 25, 2025
      This could be due to several reasons. First, the protection circuit might have been activated because of a short circuit. Check that the IMPEDANCE SELECTOR switch is set to the appropriate position and then turn the unit back on. It's also possible that the sleep timer has been activated; if so, turn the power back on and play the source again. Finally, check if the sound is muted. If it is, press MUTE or any operation buttons of this unit to cancel a mute and adjust the volume.
  • W
    wpowersAug 26, 2025
    What to do if my Yamaha RX-V800RDS has FM stereo reception noisy?
    • J
      James WilliamsAug 27, 2025
      Noisy FM stereo reception can occur if the transmitter is too far away or the antenna input is poor. Check the antenna connections, and consider using a high-quality directional FM antenna. You might also want to try using the manual tuning method.
  • M
    Mr. Brian HarrisAug 28, 2025
    How to fix Yamaha RX-V800RDS when only one speaker side can be heard?
    • K
      Kayla CurtisAug 28, 2025
      First, verify that all cable connections are correct and secure. If the problem continues, the cables themselves may be defective. Also, check the “3 L/R BALANCE” setting in the SET MENU and adjust it to the appropriate position.
  • K
    Kyle SteeleAug 30, 2025
    How to fix Yamaha Receiver if there is no sound from effect speakers?
    • N
      nicole79Aug 30, 2025
      First, make sure the sound effect is turned on by pressing EFFECT. If you are using a Dolby Surround, Dolby Digital, or DTS decoding DSP program, ensure that the material being played is encoded with Dolby Surround, Dolby Digital, or DTS. If a 96-kHz sampling digital signal is being input, there is no suggested solution.
  • K
    Kendra CunninghamSep 1, 2025
    Why is there no sound from the center speaker of my Yamaha Receiver?
    • A
      Amy LaneSep 1, 2025
      There could be several reasons for this. First, check if the output level of the center speaker is set to minimum and raise it if necessary. Next, verify that “1A CENTER SP” on the SET MENU is not set to NONE, and select the appropriate mode for your center speaker. Also, if one of the Hi-Fi DSP programs (1 to 5) has been selected, try selecting another DSP program. Finally, the source encoded with a Dolby Digital or DTS signal may not have a center channel signal.
  • R
    Rachel WernerSep 3, 2025
    Why is there no sound from the rear speakers of my Yamaha Receiver?
    • B
      Benjamin HuangSep 3, 2025
      Check that the output level of the rear speakers is not set to minimum. If it is, raise the output level. Also, if you are playing a monaural source with program 10, select another DSP program.
  • J
    Jesse LongSep 4, 2025
    Why is there no sound from the subwoofer of my Yamaha RX-V800RDS Receiver?
    • D
      Darlene SullivanSep 5, 2025
      If you are playing a Dolby Digital or DTS signal, check that “1D LFE/BASS OUT” on the SET MENU is set to SWFR or BOTH. If you are playing a 2-channel source, ensure that “1D LFE/BASS OUT” on the SET MENU is set to BOTH. The source may also not contain low bass signals (90 Hz and below).
  • M
    michellefranklinSep 6, 2025
    Why is the bass reproduction poor on my Yamaha RX-V800RDS Receiver?
    • K
      Kathleen GrantSep 7, 2025
      If “1D LFE/BASS OUT” on the SET MENU is set to SWFR or BOTH and your system does not include a subwoofer, select MAIN. Also, ensure that the output mode for each speaker (main, center, or rear) on the SET MENU matches your speaker configuration, selecting the appropriate output mode based on the size of the speakers.

Summary

CAUTION

CONTROLS AND FUNCTIONS

Front Panel

Describes the layout and function of buttons and indicators on the unit's front.

Remote Control

Explains the functions of various buttons on the remote control.

Rear Panel

Identifies and explains the purpose of the input and output jacks on the rear.

SPEAKER SETUP

Speakers to Be Used

Speaker Placement

CONNECTIONS

Connecting Audio Components

Instructions for connecting various audio sources like CD players and turntables.

Connecting Video Components

Guides on connecting video sources like VCRs, DVD players, and monitors.

Connecting the Speakers

Detailed steps for properly connecting speaker cables to the unit's terminals.

IMPEDANCE SELECTOR Switch

Explains how to set the switch to match speaker impedance for safe operation.

SPEAKER MODE SETTINGS

Summary of SPEAKER SET Items 1 A through 1 E

Summarizes the 5 essential speaker setup items configurable via the SET MENU.

ADJUSTING THE SPEAKER OUTPUT LEVELS

Using the Test Tone (TEST DOLBY SUR.)

Guides on using the built-in test tone generator for speaker level balancing.

BASIC PLAYBACK

Selecting a Sound Field Program

Instructions on choosing and applying DSP sound field programs for enhanced listening.

TUNING

Connecting the Antennas

Instructions for connecting AM and FM antennas for optimal reception.

Automatic (or Manual) Tuning

Guides on how to automatically or manually tune into radio stations.

Presetting Stations

Explains the process for automatically storing favorite FM/AM radio stations.

Manually presetting stations

Details how to manually store up to 40 radio stations with preset numbers.

Tuning in to a Preset Station

BASIC RECORDING

Special considerations when recording DTS software

SET MENU

Adjusting the Items on the SET MENU

Explains how to navigate and adjust settings within the unit's main menu system.

ADJUSTING THE LEVEL OF THE EFFECT SPEAKERS

REMOTE CONTROL FEATURES

Selector Dial

Explains the function and operation of the remote's selector dial for component control.

Controlling this unit

Button Names and Functions in Each Position

Setting the Manufacturer Code

Guides on programming the remote to control external components using manufacturer codes.

Programming a New Remote Control Function (Learn Feature)

Returning to the Factory Setting

SOUND FIELD PROGRAM

Hi-Fi DSP Programs

CINEMA DSP Programs

MOVIE THEATER Programs

SOUND FIELD PROGRAM PARAMETER EDITING

Changing Parameter Settings

TROUBLESHOOTING

General

Addresses common operational problems with the unit and general troubleshooting steps.

Tuner

Remote control

LIST OF MANUFACTURERS CODES

Yamaha RX-V800RDS Specifications

General IconGeneral
TypeAV Receiver
Amplifier TypeDiscrete
Channels5.1
Input Sensitivity200 mV
Surround Sound FormatsDolby Digital, DTS
Tuner TypeAM/FM
Digital InputsOptical, Coaxial
Video ConnectionsComposite, S-Video
Video Inputs4
Frequency Response20 Hz - 20 kHz
Signal to Noise Ratio100dB
Speaker load impedance6 ohms - 16 ohms
Video Outputs2
Power Output100 W per channel (8 ohms)
Analog Inputs6 x RCA

Related product manuals