To Next PageTo Next PageWhy does my Yamaha RX-V800RDS have a humming sound?
Ensure that the audio plugs are firmly connected. If the problem continues, the cables may be defective. Also, if you are using a turntable, make sure the grounding cord is connected to the GND terminal of the unit.
Why can't I change sound field parameters on my Yamaha RX-V800RDS Receiver?
Check if “15 MEMORY GUARD” on the SET MENU is set to ON. If it is, select OFF.
What does 'CHECK SP WIRES' mean on Yamaha RX-V800RDS Receiver?
This message indicates that the speaker cables are short-circuited. Make sure all speaker cables are connected correctly.
General| Type | AV Receiver |
|---|---|
| Amplifier Type | Discrete |
| Channels | 5.1 |
| Input Sensitivity | 200 mV |
| Surround Sound Formats | Dolby Digital, DTS |
| Tuner Type | AM/FM |
| Digital Inputs | Optical, Coaxial |
| Video Connections | Composite, S-Video |
| Video Inputs | 4 |
| Frequency Response | 20 Hz - 20 kHz |
| Signal to Noise Ratio | 100dB |
| Speaker load impedance | 6 ohms - 16 ohms |
| Video Outputs | 2 |
| Power Output | 100 W per channel (8 ohms) |
| Analog Inputs | 6 x RCA |
Describes the layout and function of buttons and indicators on the unit's front.
Explains the functions of various buttons on the remote control.
Identifies and explains the purpose of the input and output jacks on the rear.
Instructions for connecting various audio sources like CD players and turntables.
Guides on connecting video sources like VCRs, DVD players, and monitors.
Detailed steps for properly connecting speaker cables to the unit's terminals.
Explains how to set the switch to match speaker impedance for safe operation.
Summarizes the 5 essential speaker setup items configurable via the SET MENU.
Guides on using the built-in test tone generator for speaker level balancing.
Instructions on choosing and applying DSP sound field programs for enhanced listening.
Instructions for connecting AM and FM antennas for optimal reception.
Guides on how to automatically or manually tune into radio stations.
Explains the process for automatically storing favorite FM/AM radio stations.
Details how to manually store up to 40 radio stations with preset numbers.
Explains how to navigate and adjust settings within the unit's main menu system.
Explains the function and operation of the remote's selector dial for component control.
Guides on programming the remote to control external components using manufacturer codes.
Addresses common operational problems with the unit and general troubleshooting steps.
