Yamaha SR-C20A User Manual

No sound can be heard or the sound cuts off intermittently
from a Bluetooth® device
l The volume on the Bluetooth device is too low.
Raise the volume on the Bluetooth device.
l Bluetooth is not selected as the input source of the sound bar.
Select Bluetooth as the input source.
– “Listening to audio from a Bluetooth® device”(p.40)
l Playback is not being performed on the Bluetooth device.
Perform playback on the Bluetooth device.
l The audio output destination on the Bluetooth device is not set to the sound bar.
Select the sound bar as the audio output destination on the Bluetooth device.
l The connection to the Bluetooth device was terminated.
Connect to the Bluetooth device again.
l The sound bar is too far away from the Bluetooth device.
Move the Bluetooth device near the sound bar.
l A device emitting electromagnetic waves (such as a microwave oven or a wireless device) is
located nearby.
Do not use the sound bar near devices that emit electromagnetic waves.
l Playback is being performed on another Bluetooth device.
Stop the current playback, and perform playback on the other Bluetooth device.
72
TROUBLESHOOTING > When a problem occurs: Bluetooth®

Yamaha SR-C20A Specifications

General

Product color	White
TV stand usage	-
Construction type	Assembly kit
Smartphone remote support	Yes
Audio decoders	Dolby Digital, Dolby Pro Logic II
RMS rated power	100 W
Audio output channels	- channels
Tweeter impedance	6 Ω
Soundbar speaker RMS power	40 W
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.2 W
Power consumption (typical)	13 W
Cables included	AC, Optical
Subwoofer location	Built-in
Subwoofer frequency range	65 - 230 Hz
Wi-Fi	No
Bluetooth version	5.0
Connectivity technology	Wired & Wireless
Digital audio optical in	2

Weight and Dimensions

Depth	94 mm
Width	600 mm
Height	64 mm
Soundbar weight	1800 g