When a problem occurs: Bluetooth®
The sound bar cannot be connected to a Bluetooth® device
l Bluetooth is not selected as the input source of the sound bar.
Select Bluetooth as the input source.
– “Listening to audio from a Bluetooth® device”(p.40)
l The sound bar is too far away from the Bluetooth device.
Move the Bluetooth device closer to the sound bar.
l A device emitting electromagnetic waves (such as a microwave oven or a wireless device) is
located nearby.
Do not use the sound bar near devices that emit electromagnetic waves.
l The Bluetooth device you are using does not support the A2DP profile.
Use a Bluetooth device that supports the A2DP profile.
l The connection profile registered in the Bluetooth device is not functioning correctly.
Delete the connection profile in the Bluetooth device, and then connect the Bluetooth device to the
sound bar.
l The passkey for devices such as a Bluetooth adapter is not “0000”.
Use a Bluetooth device with a passkey of “0000”.
l The sound bar is already connected to another Bluetooth device (when connecting a Bluetooth
device for the first time).
Terminate the current Bluetooth connection, and then connect to the new device.
l The sound bar is already connected to two Bluetooth devices (when these devices have been
connected to the sound bar before).
Disconnect one of the currently connected Bluetooth devices, and then connect to another device.
l The Bluetooth function of the sound bar is disabled.
Enable the Bluetooth function.
– “Enabling/disabling the Bluetooth function”(p.51)
71
TROUBLESHOOTING > When a problem occurs: Bluetooth®
To Next Page
Loading...
Need help?
General
Weight and Dimensions
