FOR YOUR SAFETY – PRE-OPERATION CHECKS
4-2
2
3
4
5
6
7
8
9
Rear brake
●
Check operation.
●
If soft or spongy, have Yamaha dealer bleed hydraulic system.
●
Check brake pads for wear.
●
Replace if necessary.
●
Check fluid level in reservoir.
●
If necessary, add recommended brake fluid to specified level.
●
Check hydraulic system for leakage.
6-16, 6-17
Clutch
●
Check operation.
●
Lubricate cable if necessary.
●
Check lever free play.
●
Adjust if necessary.
6-14
Throttle grip
●
Make sure that operation is smooth.
●
Check cable free play.
●
If necessary, have Yamaha dealer adjust cable free play and lubricate cable
and grip housing.
6-12, 6-20
Control cables
●
Make sure that operation is smooth.
●
Lubricate if necessary.
6-20
Wheels and tires
●
Check for damage.
●
Check tire condition and tread depth.
●
Check air pressure.
●
Correct if necessary.
6-12, 6-14
Brake and shift pedals
●
Make sure that operation is smooth.
●
Lubricate pedal pivoting points if necessary.
6-21
Brake and clutch levers
●
Make sure that operation is smooth.
●
Lubricate lever pivoting points if necessary.
6-21
Sidestand
●
Make sure that operation is smooth.
●
Lubricate pivot if necessary.
6-22
Chassis fasteners
●
Make sure that all nuts, bolts and screws are properly tightened.
●
Tighten if necessary.
—
Instruments, lights, signals
and switches
●
Check operation.
●
Correct if necessary.
—
ITEM CHECKS PAGE
To Next Page