What to do if my Yamaha T-S500 Tuner has distortion with good antenna?
If you experience distortion and cannot get clear reception even with a good FM antenna on your Yamaha Tuner, it is likely due to multi-path interference. Adjust the antenna position to eliminate this interference.
What to do if my Yamaha T-S500 Tuner doesn't turn on?
If your Yamaha Tuner fails to turn on when you press the power button, make sure the power cord is securely connected to both the unit and the power outlet. If it still doesn't turn on, it may have been exposed to a strong electrical shock. In this case, disconnect the power cord, wait 30 seconds, and then plug it back in to restore normal operation.
How to stop crackling noises on my Yamaha T-S500 Tuner?
Continuous crackling and hissing noises in your Yamaha Tuner can be caused by electrical interference from sources like lightning, fluorescent lamps, motors, or thermostats. Try using an outdoor antenna and a ground wire to minimize the noise. Keep in mind that it may be difficult to eliminate all noise completely.
Why is the FM stereo reception noisy on my Yamaha Tuner?
Noisy FM stereo reception on your Yamaha Tuner may occur due to the distance from the transmitter or a poor antenna input. First, check the antenna connections. If the issue persists, consider using a high-quality directional FM antenna to improve reception.
What to do if my Yamaha T-S500 has buzzing noises?
Buzzing and whining noises in your Yamaha Tuner can be caused by nearby TV sets. To resolve this, move the Yamaha Tuner away from the TV set.
What to do if Yamaha T-S500 can't find AM station automatically?
If you cannot tune into the desired AM station with the automatic tuning method on your Yamaha Tuner, it may be due to a weak signal or loose antenna connections. Try tightening the AM loop antenna connections and orient it for the best reception. Alternatively, use the manual tuning method.
Why does my Yamaha T-S500 have crackling and hissing noises?
If you are experiencing continuous crackling and hissing noises with your Yamaha Tuner, it may be due to interference from lightning, fluorescent lamps, motors, thermostats, or other electrical equipment. To mitigate this, use an outdoor antenna and a ground wire. While this may help, eliminating all noise can be difficult.
What to do if my Yamaha Tuner does not operate properly?
If your Yamaha Tuner is not operating properly, it could be due to the internal microcomputer freezing from an external electric shock or a low voltage power supply. Disconnect the AC power plug from the outlet and plug it in again after about 30 seconds to resolve this issue.
What to do if there is distortion on Yamaha T-S500 Tuner even with a good FM antenna?
Distortion and poor reception, even with a good FM antenna on your Yamaha Tuner, can be due to multi-path interference. Adjust the antenna position to eliminate this interference.
Why does my Yamaha T-S500 Tuner have continuous crackling and hissing noises?
Continuous crackling and hissing noises in your Yamaha Tuner can be caused by electrical equipment like lightning, fluorescent lamps, motors, or thermostats. Try using an outdoor antenna and a ground wire to reduce the noise. Be aware that it may be difficult to eliminate all noise completely.
Details the layout and functions of the unit's front panel controls and display.
Explains how to operate the unit using its remote control sensor.
Guides on connecting FM/AM antennas and audio output to an amplifier.
Step-by-step guide for automatically finding radio stations.
Instructions for manually tuning to specific radio frequencies.
How to recall previously stored radio stations.
Automatically stores strong FM stations to preset memory slots.
Manually stores selected stations to preset memory slots.
Steps to delete individual or all stored preset stations.
How to view RDS information like program service, type, and text.
Automatically searches for stations broadcasting traffic programs (TP).
Addresses issues like noisy stereo reception, distortion, and RDS errors.
Covers crackling, hissing, buzzing, and whining noises in AM reception.
Solutions for unit not turning on, humming sounds, or general non-operation.
General| Signal-to-Noise Ratio (SNR) | 75 dB |
|---|---|
| Total Harmonic Distortion (THD) | 0.5 % |
Weight and Dimensions| Depth | 306 mm |
|---|---|
| Width | 435 mm |
| Height | 87 mm |
| Weight | 3200 g |
To Next Page
