Tyros3
92
The specifi ed switch is pressed.
A wrong switch is pressed.
(O: ID of the switch to be pressed,
X: ID of the switch which is actually pressed)
Plural switches are pressed.
Test completed
Supplement:
If an unspecifi ed switch is pressed, a sound corresponding to
the switch will be played.
Press the [START/STOP] switch to go back to the selection
screen when the test is completed.
Press the [DEMO] switch to abort the test halfway and return
to the item selection display. (The switch is effective only
after the checking of the switch is completed)
Test 24
Function: All Panel LEDs On check
Description:
Turns on all the panel LEDs. (Two-colored LEDs will light in
orange.)
Displayed Message:
All LED on check
During checking
Supplement:
There are two lighting areas and the areas will be switched as
the TAB [
#
]/[#] key is pressed.
The LEDs will go off after exiting the test item.
Test 25
Function: Red LEDs On check
Description:
Turns on all the red panel LEDs. (Two-colored LEDs will
light in red.)
Displayed Message:
Selected screen
023:SW,LEDCheck
End
023:SW,LED Check
Over Two SW
024:All Panel LED On Check
024:All Panel LED On Check
−−
025:Red LED On Check
023:SW,LED Check
TEMPO DOWN On
023:SW,LED Check
NG(O:065A,X:045A)