97
Tyros3
the indication will change to "OK".
Supplement:
It is not until the device is moved after the checking is started
when a value is loaded.
A current value will be indicated for a device until the result
is judged as OK.
When the result of all the devices are OK, only "OK" will be
shown on the screen.
Test 34
Function: Pedal 1 check
Description:
Detects Max/Min of the pedal 1.
Execute the test after connecting a foot pedal (FC7) to the
[ASSIGNABLE FOOT PEDAL 1] terminal.
q "Pedal 1 Down":
Depress the pedal.
(The sine wave C3 note sound will be produced.)
w "Pedal 1 Up":
Release the pedal.
(The sine wave G3 note sound will be produced.)
e "Pedal 1 Out":
Disconnect the pedal from the terminal.
(The sine wave C4 note sound will be produced.)
Displayed Message:
Selected screen
When the checking is started
Detection of Min
Detection of Max
In case of OK (Disconnection detection)
When unconnected (No foot pedal is connected)
０３４：Ｐｅｄａｌ１ Ｃｈｅｃｋ
０３４：Ｐｅｄａｌ１ Ｃｈｅｃｋ
Ｐｅｄａｌ１ Ｄｏｗｎ
０３４：Ｐｅｄａｌ１ Ｃｈｅｃｋ
Ｐｅｄａｌ１ Ｕｐ
０３４：Ｐｅｄａｌ１ Ｃｈｅｃｋ
Ｐｅｄａｌ１ Ｏｕｔ
０３４：Ｐｅｄａｌ１ Ｃｈｅｃｋ
ＯＫ
０３４：Ｐｅｄａｌ１ Ｃｈｅｃｋ
Ｎｏ Ｐｅｄａｌ
０３３：Ｓｌｉｄｅｒ Ｃｈｅｃｋ
ＯＫ
To Next Page
Loading...
