99
Tyros3
Displayed Message:
Selected screen
When the checking is started
Detection of Min
Detection of Max
In case of OK (Disconnection detection)
When unconnected (No foot pedal is connected)
Supplement:
Use an FC7 pedal for the checking.
Test 37
Function: MIDI check
Description:
Checks transmission/reception of signals with the [MIDI IN]
and [MIDI OUT] terminals connected with a MIDI cable in a
loop. (Start checking with the MIDI terminals connected with
a MIDI cable in a loop.)
Connect [MIDI-A OUT] to [MIDI-A IN] and [MIDI-B OUT]
to [MIDI-B IN] with MIDI cables. (The result will be NG if
connected alternately.)
The test result of MIDI-A is OK and the sine wave C3 note
sound will be produced.
The test result of MIDI-B is OK and the sine wave C4 note
sound will be produced.
Displayed Message:
Selected screen
０３６：Ｐｅｄａｌ３ Ｃｈｅｃｋ
０３６：Ｐｅｄａｌ３ Ｃｈｅｃｋ
Ｐｅｄａｌ3 Ｄｏｗｎ
０３６：Ｐｅｄａｌ３ Ｃｈｅｃｋ
Ｐｅｄａｌ3 Ｕｐ
０３６：Ｐｅｄａｌ３ Ｃｈｅｃｋ
Ｐｅｄａｌ3 Ｏｕｔ
０３６：Ｐｅｄａｌ３ Ｃｈｅｃｋ
ＯＫ
０３６：Ｐｅｄａｌ３ Ｃｈｅｃｋ
Ｎｏ Ｐｅｄａｌ
０３７：ＭＩＤＩ Ｃｈｅｃｋ
To Next Page
