4 - 6
ENG
CARBURETOR
EC464600
Float
1. Inspect:
● Float 1
Damage → Replace.
ASSEMBLY AND INSTALLATION
Carburetor
1. Install:
● Pilot air screw 1
Note the following installation points:
● Screw in the pilot air screw until it is lightly
seated.
● Back out it by the specified number of
turns.
Pilot air screw:
1-3/4 turns out
2. Install:
● Throttle valve 1
● Starter plunger 2
NOTE:
Align the slit a of the throttle valve with the tab
b of the carburetor top.
FUEL LEVEL ADJUSTMENT
WARNING
Gasoline (fuel) and its vapors are highly
flammable and explosive. Keep away from
sparks, cigarettes, flames or other sources
of ignition.
To Next Page
Loading...
