EasyManua.ls Logo

Yamaha TW-E3C - Charging the Charging Case

Yamaha TW-E3C
62 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Charging the charging case
To charge the charging case, connect the included USB power adaptor.
CAUTION
(
The charging case is not waterproof. Do not expose this product to liquids such as sweat, rainwater or seawater.
(
Be sure to use the USB power cable that was included with this product.
(
When using a USB power adaptor, be sure that the commercially-available adaptor is compatible with 5 V DC (at least 0.5 A)
power output.
(
When charging this product inside of China, be sure to use a USB power adaptor that is approved by CCC.
(
Recommended charging temperatures: 5ºC–40ºC
1 Plug the USB power cable (type C side) into the charging case.
2 Plug the USB power cable (type A side) into the USB power adaptor.
3 Plug the USB power adaptor into the power outlet.
Charging will begin. Charging takes about 2 hours.
While the case is charging, the indicators light up as shown below.
Remaining battery power Indicator
100%
75–100%
50–75%
25–50%
0–25%
14
Charging and Powering > Charging the charging case

Table of Contents

Related product manuals