3-27
1
2
3
4
5
6
7
8
9
EAU1044D
INSTRUMENT AND CONTROL FUNCTIONS
3-9
EAUT1502
Seat
ZAUM00**
To open the seat
1. Place the scooter on the
centerstand.
2. Insert the key into the main switch,
and then turn it counterclockwise
to the first “OPEN” position. If the
main switch is in the “LOCK” posi-
tion, turn the key counterclockwise
to the second “OPEN” position.
TIP
Do not push inward when turning the
key from “OFF” to “OPEN” or from
“LOCK” to “OPEN”.
3. Fold the seat up.
To close the seat
1. Fold the seat down, and then push
it down to lock it in place.
2. Remove the key from the main
switch if the scooter will be left un-
attended.
TIP
Make sure that the seat is properly se-
cured before riding.
Seat<IXE>
Helmet holder<IXE>
EAU14301
Helmet holder
1
ZAUM00**
1. Helmet holder
The helmet holder is located under the
seat.
To secure a helmet to the helmet
holder
1. Open the seat. (See page 3-9.)
2. Attach the helmet to the helmet
holder, and then securely close the
seat. WARNING! Never ride with
a helmet attached to the helmet
holder, since the helmet may hit
objects, causing loss of control
and possibly an accident.[EWA10161]
To Next Page
Loading...
Need help?
General