Yamaha VINO YJ50RP User Manual

3-6
EAU03447
Fuel tank cap
To remove the fuel tank cap
Slide the lock cover open, insert the
key into the lock, and then turn it 1/4
turn clockwise. The lock will be
released and the fuel tank cap can be
removed.
EW000024
w
Make sure that the fuel tank cap is
properly installed before riding.
INSTRUMENT AND CONTROL FUNCTIONS
3
a
1
1. Fuel tank cap lock cover
a. Unlock.
To install the fuel tank cap
1. Insert the fuel tank cap into the
tank opening with the key insert-
ed in the lock and with the marks
on the cap and tank aligned.
2. Turn the key counterclockwise to
the original position, remove it,
and then close the lock cover.
NOTE:
The fuel tank cap cannot be installed
unless the key is in the lock. In addi-
tion, the key cannot be removed if the
cap is not properly installed and
locked.
1
1. Match marks

Yamaha VINO YJ50RP Specifications

General

Displacement	49cc
Bore x Stroke	38.0mm x 43.6mm
Compression Ratio	12.0:1
Starting System	Electric and Kick
Final Drive	V-Belt
Front Suspension	Telescopic fork
Rear Suspension	Unit swing
Front Brake	Drum
Rear Brake	Drum
Front Tire	90/90-10
Rear Tire	90/90-10
Wheelbase	1, 160mm
Engine Type	4-stroke, SOHC
Ignition	TCI
Transmission	Automatic