Yamaha WaveRunner FX HO 2016 User Manual

Operation and handling requirements
63
engine, which can result in severe dam-
age.
[ECJ00554]
Electric bilge draining system
Bilge water in the engine compartment is
drawn in by the operation of the electric bilge
pump and discharged from the watercraft.
To drain the bilge water:
Start the engine to operate the electric bilge
pump.
TIP:
The electric bilge pump continues to operate
for a short time after the engine stops.
EJU42432
Transporting on a trailer
When transporting the watercraft on a trailer,
secure the tie downs to the trailer through the
bow eye and stern eyes. NOTICE: Do not at-
tach ropes or tie downs to any part of the
watercraft other than the bow eye and
stern eyes to secure the watercraft to the
trailer. Otherwise, the watercraft may be
damaged. Wrap the ropes or tie downs
with towels or rags where they touch the
body of the watercraft to avoid scratches
or damage.
[ECJ02150]
UF2T75E0.book Page 63 Thursday, May 21, 2015 9:30 AM

Yamaha WaveRunner FX HO 2016 Specifications

General

Displacement	1812 cc
Compression Ratio	11.0:1
Fuel Delivery System	Electronic Fuel Injection (EFI)
Horsepower	180 hp
Starter System	Electric
Lubrication System	Wet Sump
Engine Type	4-stroke, 4-cylinder
Fuel Capacity	18.5 gal
Rider Capacity	3 persons
Fuel Type	Regular unleaded
Pump Type	155 mm
Bore x Stroke	86mm x 78mm
Cooling System	Water-cooled
Hull Material	Fiberglass
Color Options	Black
Top Speed	65 mph