Yamaha WaveRunner FX HO 2016 User Manual

First-time operation
64
EJU36666
Engine break-in
NOTICE
ECJ00432
Failure to perform the engine break-in
could result in reduced engine life or even
severe engine damage.
The engine break-in is essential to allow the
various components of the engine to wear
and polish themselves to the correct operat-
ing clearances. This ensures proper perfor-
mance and promotes longer component life.
To perform the engine break-in:
(1) Check the engine oil level. (See page 60
for information on checking the engine
oil level.)
(2) Launch the watercraft and start the en-
gine. (See page 77 for information on
starting the engine.)
(3) For the first 5 minutes, operate with the
engine speed at 2000 r/min.
(4) For the next 30 minutes, operate with the
engine speed below 5000 r/min.
(5) For the next 1 hour, operate with the en-
gine speed below 6000 r/min.
After the engine break-in is complete, the wa-
tercraft can be operated normally.
UF2T75E0.book Page 64 Thursday, May 21, 2015 9:30 AM

Yamaha WaveRunner FX HO 2016 Specifications

General

Displacement	1812 cc
Compression Ratio	11.0:1
Fuel Delivery System	Electronic Fuel Injection (EFI)
Horsepower	180 hp
Starter System	Electric
Lubrication System	Wet Sump
Engine Type	4-stroke, 4-cylinder
Fuel Capacity	18.5 gal
Rider Capacity	3 persons
Fuel Type	Regular unleaded
Pump Type	155 mm
Bore x Stroke	86mm x 78mm
Cooling System	Water-cooled
Hull Material	Fiberglass
Color Options	Black
Top Speed	65 mph