Yamaha WaveRunner FX HO 2016 User Manual

Operation
87
EJU40242
After removing the watercraft from
the water
NOTICE
ECJ01311
Do not run the engine over 4000 r/min on
land. Also, do not run the engine for more
than 15 seconds without supplying water,
otherwise the engine could overheat.
After operating and removing the watercraft
from the water, promptly discharge the re-
maining water from the cooling water pas-
sages.
To discharge water from the cooling water
passages:
(1) Make sure that the area around the wa-
tercraft is clear, and then start the en-
gine.
(2) Discharge the remaining water out of the
cooling water passages by alternately
squeezing and releasing the throttle lever
quickly for 10 to 15 seconds.
(3) Stop the engine.
UF2T75E0.book Page 87 Thursday, May 21, 2015 9:30 AM

Yamaha WaveRunner FX HO 2016 Specifications

General

Displacement	1812 cc
Compression Ratio	11.0:1
Fuel Delivery System	Electronic Fuel Injection (EFI)
Horsepower	180 hp
Starter System	Electric
Lubrication System	Wet Sump
Engine Type	4-stroke, 4-cylinder
Fuel Capacity	18.5 gal
Rider Capacity	3 persons
Fuel Type	Regular unleaded
Pump Type	155 mm
Bore x Stroke	86mm x 78mm
Cooling System	Water-cooled
Hull Material	Fiberglass
Color Options	Black
Top Speed	65 mph