Need help?Do you have a question about the Yamaha YHT-5950U and is the answer not in the manual?
General| Channels | 5.1 |
|---|---|
| Type | AV Receiver |
| HDMI Inputs | 4 |
| HDMI Outputs | 1 |
| Bluetooth | Yes |
| Wi-Fi | No |
| 4K Pass-Through | Yes |
| Audio Formats Supported | Dolby TrueHD, DTS-HD Master Audio |
| HDR Compatible | Yes |
| Dolby Atmos | Yes |
| DTS:X | Yes |
| Impedance | 6 Ohms |
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | 100 dB |
| USB Port | Yes |
Details on inserting batteries and operating range of the remote control.
Describes the YPAO function for automatic speaker setup and room optimization.
Details on using various sound programs and surround decoders for enhanced audio experiences.
Explains how to enjoy network content like AirPlay, media servers, and internet radio.
Explains the SCENE function for one-touch input source and settings selection.
Identifies and explains the controls and indicators on the unit's front panel.
Identifies and explains the input/output jacks and connectors on the unit's rear panel.
Identifies and explains the buttons and functions of the supplied remote control.
Instructions on connecting speakers to the unit.
Lists essential requirements for connecting speakers and subwoofers to the unit.
Explains how to set the speaker impedance for compatible models.
Provides step-by-step instructions on connecting speaker cables properly.
Instructions for connecting a subwoofer using an audio pin cable.
Explains a speaker layout for when rear speakers cannot be placed.
Guides on connecting front speakers for bi-amp functionality.
Details connecting the unit to a TV via HDMI, including ARC functionality.
Explains connecting a TV using composite video and digital optical cables.
Instructions for connecting video devices via HDMI.
Covers non-HDMI connections like composite video and audio.
Guides on connecting audio devices like CD players using various audio jacks.
Instructions for connecting FM and AM antennas to the unit.
Details connecting the DAB/FM antenna for specific models.
Describes network setup via the MusicCast setting for wireless connections.
Provides instructions for establishing a wired network connection.
Details on connecting the power cable and setting the voltage selector.
Manual configuration of speaker settings before YPAO, for specific setups.
Detailed procedure for using YPAO to automatically optimize speaker settings.
Lists YPAO error messages, their causes, and remedies for troubleshooting.
Lists YPAO warning messages, their causes, and remedies for troubleshooting.
Provides steps to add the unit to the MusicCast network and configure wireless settings.
Overview of enjoying various sound field effects and selecting sound modes.
Details on creating immersive 3D sound fields using CINEMA DSP technology.
Recommends sound programs based on content type for optimal listening.
Explains how Virtual CINEMA DSP creates surround effects without rear speakers.
Describes Virtual CINEMA FRONT for surround sound with front speakers.
Guides on enjoying surround sound effects through headphones.
How to enable straight decode for pure stereo or unprocessed multichannel sound.
Using the surround decoder for multichannel playback without DSP effects.
Explains direct playback mode for high-fidelity sound quality with minimal circuitry.
How to enable Extra Bass for enhanced low-frequency response.
Using Compressed Music Enhancer to improve sound quality of compressed audio.
Explains the Zone A/B function for playing audio in different rooms simultaneously or separately.
Instructions on connecting speakers for Zone B audio output.
Step-by-step guide to select Zone B and play music from an input source.
Method to adjust Zone B volume independently using the remote control.
Basic steps for playing back video and music from connected external devices.
How to adjust FM/AM frequency step settings for different regions.
Guides on tuning into radio stations by manually specifying frequencies.
How to tune into a registered radio station using its preset number.
Automates the registration of FM radio stations with strong signals.
Step-by-step process to manually register radio stations to preset numbers.
Guides on playing music from Bluetooth devices like smartphones to the unit.
Instructions for playing iTunes/iPhone music wirelessly using AirPlay.
How to connect and play music files from a USB storage device.
How to access and play music files from shared media servers.
How to listen to streaming services using the MusicCast CONTROLLER app.
Explains the SCENE function for one-touch input and settings selection.
Guides on changing default settings and registering custom scenes.
Adjusting volume differences between Zone A and Zone B.
Enables/disables HDMI Control for operating connected devices.
Guides on updating the unit's firmware wirelessly.
Backs up and restores all unit settings to/from a USB memory device.
Resets all unit settings to their factory defaults.
Instructions for updating the unit's firmware via USB or network.
General troubleshooting steps to follow when issues arise.
Troubleshoots issues related to power, system freezing, and remote control.
Addresses issues of no audio output from the unit or connected devices.
Diagnoses and resolves no sound issues from individual speakers.
Troubleshoots no sound issues specifically from the subwoofer.
Addresses issues of no video signal from the unit or playback device.
Troubleshoots weak/noisy FM/AM reception and station selection issues.
Troubleshoots DAB reception issues, including no reception and poor signal strength.
Troubleshoots USB device detection problems, including connection and file system.
Troubleshoots issues with network features, IP address, and IPv6 support.
Resolves problems connecting to the internet via wireless router.
Addresses issues with the unit detecting media servers.
Troubleshoots problems establishing Bluetooth connections.
Lists error messages displayed on the front panel and their remedies.
Detailed steps for performing a firmware update over the network.
Steps to set up wireless surround speakers using the MusicCast CONTROLLER app.
Explains how HDMI Control allows synchronized operation of connected devices.
Details ARC functionality for inputting TV audio to the unit via HDMI.
Provides detailed technical specifications for the unit's inputs, outputs, and features.
Details audio specifications like rated output power, frequency response, and tone control.
To Next Page
