Need help?Do you have a question about the Yamaha CR-820 and is the answer not in the manual?
General| Frequency Response | 20 Hz to 20 kHz |
|---|---|
| Total Harmonic Distortion | 0.1% (at rated output) |
| Tuning Range | FM, MW |
| Input Sensitivity | 2.5mV (MM), 150mV (line) |
| Channel Separation | 50 dB (1 kHz) |
| Output | 150mV (line), 30mV (DIN) |
| Weight | 12 kg |
| Speaker Load Impedance | 4 ohms to 16 ohms |
| Semiconductors | 4 x IC |
| Power Output | 55 watts per channel (8 ohms) |
Essential safety advice regarding electrical hazards, environment, and physical handling of the unit.
Instructions for connecting FM antennas, including coaxial cable and 300-ohm balanced terminals.
Steps for tuning FM stations, using OTS, and operating the FM MUTING/MONO switch.
Using the REC OUT Selector and INPUT Selector for simultaneous listening and recording.
Performance details for audio output, input sensitivity, frequency response, and tone controls.
Solutions for common audio problems like no sound, channel imbalance, and hum.
Solutions for AM/FM reception issues like hum, crackling, and monaural stereo.
To Next Page
