Need help?Do you have a question about the Yamaha CR-2020 and is the answer not in the manual?
General| Signal to Noise Ratio | 95dB (line) |
|---|---|
| Tuning Range | FM, MW |
| Input Sensitivity | 2.5mV (MM), 150mV (line) |
| Speaker Load Impedance | 4Ω to 16Ω |
| Year Introduced | 1977 |
| Total Harmonic Distortion | 0.05% |
| Output | 150mV (line) |
Essential safety and operational guidelines for using the CR-2020 receiver.
Details on the POWER ON/OFF switch, VOLUME, and BALANCE controls.
Using INPUT SELECTOR, PHONO, and FM/AM tuning controls.
Using Bass, Treble, Presence controls, Filters, and Mode selectors.
Instructions for connecting speaker systems to the rear panel terminals.
Tuning FM stations, using OTS, Muting, and FM Blend functions.
Using the REC OUT selector for independent audition and recording.
Detailed performance metrics for the audio output section.
Performance metrics for FM and AM tuner sections.
Common audio problems and their solutions for the receiver.
Troubleshooting issues related to no sound or unbalanced speaker output.
Diagnosing and fixing common tuner reception issues.
Resolving issues with AM hum, FM hiss, and signal interference.
To Next Page
