Need help?Do you have a question about the Yamaha CR-420 and is the answer not in the manual?
General| Frequency Response | 20Hz to 20kHz |
|---|---|
| Tuning Range | FM, MW |
| Input Sensitivity | 2.5mV (MM), 150mV (line) |
| Output | 150mV (line) |
| Speaker Load Impedance | 4Ω to 16Ω |
| Power Output | 22 W per channel into 8Ω (stereo) |
| Dimensions | 435 x 335mm |
| Channel Separation | 50dB (line) |
Essential safety instructions and operational advice for preventing damage and ensuring proper use of the receiver.
Details on power switch, speaker selection, high filter, tuner mode, FM muting, mode switch, and tuning knob.
Explanation of volume, balance, input selector, and REC OUT selector functions for audio management.
Covers loudness, bass, treble controls, tuning/signal meters, tuning scale, and LED indicators.
Details on connecting antennas, input sources (PHONO, AUX), and tape deck connections (PB/REC OUT).
Guidance on connecting speakers, AC outlets, voltage selector, and the main power line.
Instructions for connecting FM antennas and performing FM broadcast tuning for optimal reception.
Explanation of FM muting function and procedures for AM radio tuning and reception.
Guide to connecting a turntable, selecting the PHONO input, and optimizing record playback quality.
Detailed explanation of the continuous loudness, high filter, and comprehensive tone controls for sound shaping.
Instructions for independent audition/recording, tape deck connections, and tape-to-tape dubbing.
Detailed technical specifications for the receiver's audio output, input, and FM reception capabilities.
Technical specifications for AM reception, general features, semiconductors, power, dimensions, and weight.
Common faults and solutions for the audio section, including power, sound output, and speaker issues.
Common faults and solutions for the tuner section, addressing issues like hum, interference, and reception problems.
To Next Page
