Need help?Do you have a question about the Yamaha CR-620 and is the answer not in the manual?
General| Tuning Range | FM, MW |
|---|---|
| Input Sensitivity | 2.5mV (MM), 150mV (line) |
| Output | 150mV (line) |
| Speaker Load Impedance | 4Ω to 16Ω |
| Frequency Response | 10Hz to 50kHz |
| Signal to Noise Ratio | 75dB (MM), 90dB (line) |
| Channel Separation | 50dB (1kHz) |
| Power Output | 35W per channel into 8Ω (stereo) |
Lists technical performance data for the amplifier stage of the receiver.
Details technical performance data for the FM/AM tuner stages.
Procedures for calibrating the amplifier circuit board, including idling current.
Instructions for calibrating the tuner circuit board.
Procedures for fine-tuning the FM section's tracking accuracy.
Procedures for fine-tuning the AM section's tracking accuracy.
To Next Page
