Need help?Do you have a question about the Yamaha CR-1000 and is the answer not in the manual?
General| Type | Stereo Receiver |
|---|---|
| Input Sensitivity | 150mV (line) |
| Dimensions | 512 x 172 x 360mm |
| Weight | 20kg |
| Tuning range | FM, MW |
| Speaker load impedance | 4 - 16 ohms |
| Power Output | 100 W per channel |
| Frequency Response | 20Hz to 20kHz |
| Total Harmonic Distortion | 0.1% |
| Signal-to-Noise Ratio | 90dB (line) |
| Semiconductors | Transistors, Diodes |
Essential safety advice and operational guidelines for first-time users of the CR-1000 receiver.
Step-by-step guide to connect speakers and antenna and perform an initial FM sound test.
Explains front panel controls like Tone, Balance, Loudness, AFC, FM Stereo indicators, and input/output jacks.
Details on headphone jack, speaker switches, microphone jack, mode, tape, function switches, and volume control.
Identifies and describes the rear panel connections and outlets for the Type A model.
Identifies and describes the rear panel connections and outlets for the Type B model.
Identifies and describes the rear panel connections and outlets for the Type C model.
Identifies and describes the rear panel connections and outlets for the Type D/E models.
Illustrates how to connect various external audio components to the receiver.
Guides on connecting speaker systems and headphones for audio output.
Instructions for connecting FM antennas and optimizing FM broadcast reception.
Details on connecting turntables, including impedance matching and ground connections.
Instructions for connecting auxiliary sources and tape decks for playback and recording.
Covers tape dubbing, microphone connection, and includes information on accessories.
Explains how to use tone, filter, and balance controls to shape the audio output.
Describes the Loudness control, Pre Out/Main In jacks, and Multipath/IF Out features.
A chart listing common problems, their causes, and suggested corrections for the CR-1000.
Additional troubleshooting tips addressing issues like hum, distortion, and howling during playback.
Visual representation of the CR-1000's internal signal paths and component interactions.
Detailed performance metrics for the audio amplifier section, including power output and distortion.
Covers general aspects like semiconductors, power source, dimensions, and weight of the CR-1000 unit.
To Next Page
