To Next PageTo Next Page
Need help?Do you have a question about the Yamaha YP-701 and is the answer not in the manual?
Used for the lateral adjustment of the tonearm.
Used to balance the tonearm according to cartridge weight.
Mounting point for the cartridge, attached to the tonearm.
Special soft bristles for cleaning dust from the stylus.
Used to lightly brush the record surface to remove dust.
For lubricating specific points when needed.
Weight to be added during tonearm adjustment.
Compensates for unusually lightweight cartridges.
For playing 45 rpm records without a special spindle.
Includes (+) and (-) types for adjustments and assembly.
Ideal for handling small parts and screws.
Special cloths for cleaning the unit's cabinet and stylus.
Instructions for removing transport screws before operation.
Procedure to set the voltage selector to the correct local voltage.
Engages center shaft gears for the auto-return system.
Selectable pulley for 50Hz or 60Hz line frequency.
Controls the lifting and lowering of the tonearm.
Allows selection between 33 and 45 RPM speeds.
Powers the unit and engages the auto-return system.
Guidance on choosing a compatible MM, IM, or MC cartridge.
Steps for mounting the cartridge into the head shell.
Setting the tonearm overhang to 17mm for optimal tracking.
Balancing the tonearm for horizontal equilibrium.
Adjusting the lateral weight for parallel tonearm positioning.
Setting the correct tracking force for the cartridge.
Compensates for skating force to prevent record wear.
Connecting the YP-701 to an amplifier or receiver.
Steps for playing records, including cueing and stopping.
Adjusting the tonearm lifter for proper clearance.
Guidelines for annual lubrication and cleaning.
Common problems and their solutions.
General
