To Next PageTo Next Page
Need help?Do you have a question about the Yamaha PX-3 and is the answer not in the manual?
General| Drive System | Direct drive |
|---|---|
| Speed | 33 1/3 and 45rpm |
| Signal to Noise Ratio | 78 dB |
| Tracking Force Adjustment | 0 to 3 grams |
| Motor | Quartz Locked DC Servo Motor |
Comprehensive safety and operating instructions for user protection and proper appliance use.
Detailed identification of all components and their operational roles on the YAMAHA PX-3 turntable.
Instructions for removing transit brackets and screws, and mounting the turntable platter and rubber mat.
Procedure for securing the tonearm for safe transportation to prevent damage.
Guidance on fitting cartridges of varying weights and aligning the stylus.
Instructions for mounting the main weight, sub-weights, and headshell onto the tonearm.
Steps to achieve a balanced tonearm for optimal tracking force.
Procedure for setting the correct tracking force for the installed cartridge.
How to adjust the tonearm height to ensure it is parallel with the record surface.
Steps to adjust the unit's insulators to ensure it is perfectly level.
Instructions for attaching and detaching the dust cover.
Guidance on connecting the turntable to an audio amplifier and power.
Step-by-step guide to placing records and initiating playback.
Detailed explanation of tonearm movement controls for precise playback positioning.
How to activate and deactivate the automatic repeat playback mode.
Information on how function switches take effect immediately during operation.
