Need help?Do you have a question about the Yamaha PX-2 and is the answer not in the manual?
General| Drive System | Direct drive |
|---|---|
| Speed | 33 1/3, 45 RPM |
| Motor | DC servo motor |
| Platter | Aluminum |
| Tracking Force Range | 0 to 3g |
| Wow and Flutter | 0.025% WRMS |
| Signal-to-Noise Ratio | 78dB |
| Cartridge | Not included |
Procedures for removing the bottom cover and key internal assemblies.
Steps to remove motor servo, fuse, and power switch boards.
Procedure for detaching the tonearm from its base.
Instructions for removing the drive motor assembly.
Adjusting the motor's speed synchronization for accurate playback.
Specific adjustment for quartz lock synchronization.
Adjusting electronic circuits and tonearm positioning.
Calibrating the tonearm angle in raised and lowered positions.
Adjusting the mechanism for detecting tonearm position.
Adjusting the auto-up function at the record's lead-out groove.
Calibrating the speed of tonearm movement.
Specific adjustment for normal tonearm driving speed.
Configuration of YM-294 pins and explanation of input signals.
Description of automatic commands and output signals from the YM-294.
Detailed specifications for the arm's type, length, and tracking force.
Technical data for the motor, platter, and drive system.
Details on automatic functions, power, and physical dimensions.
To Next Page
