Need help?Do you have a question about the Yamaha YP211 and is the answer not in the manual?
General| Speeds | 33 1/3 and 45 rpm |
|---|---|
| Overhang | 16 mm |
| Type | Belt-drive |
| Motor | DC servo |
| Tonearm | Static balance type |
| Cartridge weight range | 4 to 6 g |
| Cartridge | Moving magnet type |
| Output level | 2.5mV |
| Frequency response | 20Hz to 20kHz |
| Power supply | AC 50/60 Hz |
| Platter | 300mm die-cast aluminum |
Manual is essential for optimal performance of sensitive audio equipment.
Ensure voltage selector matches local mains supply; check frequency settings.
Description of the S-type tone arm, headshell, balance counterweight, and cueing lever.
Details on the inside force canceler for balanced groove tracking.
Crucial step to match the unit's voltage setting to the local AC mains supply.
Step-by-step guide for setting the correct tracking force using the balance counterweight.
Guide for setting the anti-skating force using the weight and grooved pole.
Steps for connecting the YP-211's audio leads and ground to an amplifier.
Guide on setting input, starting playback, using the cueing lever, and auto-return.
Solutions for missing sound, distortion, clicking, scraping, or humming.
To Next Page
