To Next PageTo Next PageWhat to do if my Yamaha Speaker System fails to turn on?
If your Yamaha Speaker System doesn't turn on, ensure the AC power supply cable is firmly connected to the AC wall outlet. Also, if the unit has been exposed to a strong external electric shock, set it to standby mode, disconnect the AC power supply cable, plug it back in after 30 seconds, and then use it normally.
General| Brand | Yamaha |
|---|---|
| Model | YSP-40D |
| Category | Speaker System |
| Language | English |
Important safety warnings and precautions to be followed before operating the unit.
Explains the core technology for multi-channel surround sound generation.
Details on specialized beam modes for enhanced surround sound.
Describes Yamaha's Cinema DSP technology for movie audio.
Information on High-Definition Multimedia Interface capabilities.
Covers compatibility with modern audio formats and DAB/iPod functions.
Step-by-step instructions on how to use the manual for setup and operation.
Details of buttons, display, and input jacks on the unit's front panel.
Explanation of all input/output ports located on the unit's rear panel.
Description of all buttons and functions on the supplied remote control.
Recommendations for choosing the optimal location for sound beam reflection.
Guidance on methods for physically installing the unit using racks, stands, or wall brackets.
Categorization of all audio/video input/output jacks and terminals on the unit.
Details on cables used for audio/video connections and their proper use.
Instructions for connecting TVs, DVD players, iPods, and other devices.
Guidance on connecting the DAB antenna and the AC power supply.
Steps for inserting batteries into the remote control.
Instructions for turning the unit on and setting it to standby mode.
How to display the on-screen display (OSD) menu on your TV.
Illustrates the overall flow of the system setup procedure.
Procedure to select the desired language for the SET MENU.
Overview of the automatic beam angle, delay, volume, and quality optimization process.
Instructions for connecting and positioning the IntelliBeam microphone.
Step-by-step guide to perform the automatic sound optimization.
Troubleshooting guide for errors encountered during AUTO SETUP.
Procedure to save current settings into system memory.
Procedure to recall saved settings from system memory.
How to select and play back audio from connected components.
Instructions for adjusting volume levels and muting the sound output.
Introduction to Digital Audio Broadcasting technology and its benefits.
Steps for performing initial scans and tuning into DAB services.
Configuration options including tuning modes, presets, TUNE AID, and DRC.
Instructions for connecting an iPod via the universal dock.
Using remote control for iPod playback in Simple and Menu Browse modes.
Choosing between 5 Beam, Stereo Plus 3 Beam, 3 Beam, and My Surround modes.
Understanding front panel indicators for input signals and decoders.
Applying surround effects to 2-channel audio sources.
Fine-tuning surround parameters for Dolby Pro Logic II and DTS Neo:6.
Enjoying analog TV audio signals in surround sound.
Using 2-channel stereo mode for Hi-Fi sources or TV replacement.
Using 5-channel stereo mode for larger listening areas or parties.
Using the My Beam microphone to automatically adjust beam angles.
Manually adjusting the beam angle for focused sound.
Explanation of sound fields, early reflections, and reverberations.
Features of various sound field programs like Music Video, Concert Hall, etc.
Selecting and using CINEMA DSP programs for movies, music, and sports.
Improving sound quality of compressed audio artifacts like MP3.
Adjusting volume for night listening or TV volume equalization.
Setting the unit to automatically enter standby mode after a set period.
Introduction to manual tuning of listening environment and sound parameters.
Manually adjusting parameters related to sound output (Tone, Subwoofer, Delay).
Manually adjusting parameters related to sound beam output (Angles, Length).
Manually adjusting parameters related to audio and video input.
Manually adjusting parameters related to the display settings.
Using test tones to manually balance channel levels for surround sound.
Manually adjusting channel levels while playing back audio sources.
Protecting saved settings from accidental erasure or modification.
Setting maximum and turn-on volume levels.
Activating/deactivating the monitor check function for HDMI signals.
Testing sound beam output to experience its effects.
Disabling the INPUT key on the front panel for system parameter adjustment.
Disabling front panel keys except during system parameter adjustment.
Resetting all unit parameters to factory default settings.
Programming the remote to control other AV components.
Instructions for operating TVs, DVD players, VCRs, and STBs with the remote.
Creating sequences of operations for TV control with a single button press.
Procedure to cancel previously set macro commands.
Solutions for common issues like power, no sound, and overheating.
Troubleshooting specific problems related to DAB reception and iPod connectivity.
Solutions for remote control malfunctions and HDMI connection errors.
Definitions of Dolby, DTS, Euphony, and other audio formats/technologies.
Definitions for HDMI, LFE, PCM, and signal types.
Explanation of SRS TruBass technology.
Technical details on output power, drivers, and frequency response.
Details on input/output jacks, system connectors, and DAB section specifications.
Information on power supply, dimensions, weight, and HDMI interface standard.
