Why the TV Remote Repeater function does not work on Yamaha YSP-1400 Speaker System?
If the TV cannot be controlled by using the TV Remote Repeater function, the TV Remote Repeater function may be disabled. Enable the TV Remote Repeater function.
What to do if Yamaha YSP-1400 Speaker System remote control is not working?
If your Yamaha Speaker System isn't responding to the remote control, it could be due to being out of the operating range, weak batteries, or interference with the remote control sensor. Ensure you are within the operating range, replace the batteries with new ones, and adjust the lighting angle or reposition the unit if the sensor is exposed to direct sunlight or strong lighting.
Why is no sound coming from the subwoofer of my Yamaha Projector?
If there's no sound from the subwoofer, the volume of the subwoofer might be too low, so turn it up. Alternatively, the subwoofer setting might not be correct. With the unit turned off, hold down the SUBWOOFER key (+ or -) on the remote control for more than 5 seconds to switch the subwoofer setting.
Why the TV cannot be controlled using the TV remote control with Yamaha YSP-1400 Speaker System?
If the TV cannot be controlled using the TV remote control with your Yamaha Speaker System, the remote control sensor of the TV might be blocked by the unit. Use the TV Remote Repeater function so that the TV remote control sensor is not blocked.
What to do if Yamaha YSP-1400 Speaker System unit is not reacting?
If the unit is not reacting, hold down the power button on the front panel of the unit for more than 10 seconds to reboot it. If the problem persists, disconnect the power cable from the AC wall outlet and plug it again.
Why does the volume of my Yamaha Projector decrease when I turn it on?
The automatic volume adjustment function may be working. If necessary, turn up the volume.
Why is there noise coming from my Yamaha YSP-1400 Speaker System?
If you're hearing noise from your Yamaha Speaker System, it might be too close to another digital or high-frequency device. Try moving those devices away from the unit.
What to do if Yamaha YSP-1400 Speaker System is not responding?
If your Yamaha Speaker System is unresponsive, the internal microcomputer might be frozen due to an external electric shock or a drop in power supply voltage. Reboot the system by holding down the power button on the front panel for more than 10 seconds. If the issue continues, disconnect the power cable from the AC wall outlet and plug it back in.
What to do if my Yamaha YSP-1400 does not learn TV remote control operations?
If the unit does not learn TV remote control operations, hold down the key for more than 1 second twice or three times.
Why is there no sound coming from my Yamaha Projector?
There might be several reasons for the lack of sound. Ensure that the correct input source is selected, the mute function is off, and the volume is at an audible level. If another input source is selected, choose the appropriate one. If the mute function is activated, deactivate it. If the volume is too low, increase it.
Details on symbols used to indicate potential risks and important information in the manual.
Instructions and precautions for mounting the unit securely on a wall.
Learn TV remote signals to control unit power and volume.
General| Game mode | Yes |
|---|---|
| Audio decoders | Dolby Surround |
| RMS rated power | 76 W |
| Audio output channels | 5.1 channels |
| Number of woofer drivers | 2 |
| Soundbar speaker RMS power | - W |
| Number of full-range drivers | 8 |
| Subwoofer included | No |
| Receiver included | - |
| Product color | White |
| Apple docking compatibility | Not supported |
| Audio (L/R) in | 1 |
| Connectivity technology | Wired & Wireless |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 24 W |
Weight and Dimensions| Depth | 133 mm |
|---|---|
| Width | 1000 mm |
| Height | 96 mm |
| Soundbar weight | 4300 g |
To Next Page
