What to do if my Yamaha Subwoofer has no sound?
If your Yamaha Subwoofer isn't producing any sound, there are a couple of things you can check: First, make sure the volume isn't set to the minimum; try increasing it. Second, ensure that the speaker cables are securely connected.
Why is the sound level too low on my Yamaha YST-SW216 Subwoofer?
There are several reasons why the sound level on your Yamaha Subwoofer might be too low: 1. Check that the speaker cables are correctly connected, ensuring L (left) is connected to L, R (right) to R, “+” to “+” and “–” to “–”. 2. If you are playing a source sound with few bass frequencies, try playing a source sound with more bass and set the HIGH CUT switch to the HIGH position. 3. The issue might be standing waves. Try repositioning the subwoofer or placing bookshelves along the walls to break up the parallel surface.
How to fix a Yamaha YST-SW216 that won't turn on?
If your Yamaha Subwoofer isn't turning on even when the power switch is in the ON position, the most likely cause is that the power plug is not securely connected. Ensure that the power plug is properly and securely connected.
General| Power Output | 100 W |
|---|---|
| Phase Switch | Yes |
| Auto Power On/Off | Yes |
| Type | Active |
| Driver Size | 8 inches |
| Inputs | Line level |
| Technology | Advanced YST (Yamaha Active Servo Technology) |
Important safety precautions for operating the unit to prevent hazards and damage.
Instructions for attaching non-skid pads to the subwoofer bottom.
Connects subwoofer to amplifier's line output via pin jacks.
Connects subwoofer to amplifier's speaker output terminals using cables.
Details on connecting speaker cables to the subwoofer's input terminals.
Details on power, volume, switches, indicators, and connection terminals on the unit.
Step-by-step guide to set volume and tone balance for optimal sound.
Illustrates frequency response curves for HIGH CUT settings and system tuning.
To Next Page
