4
WARNING (Use and storage)
Mandatory
compliance
If the device is dropped or damaged, turn off the power
immediately, pull out the plug, and request a
repair/inspection.
Failure to comply may cause a fire or electric shock.
Use at AC100-240V only to avoid a potential fire or
electrical shock hazard. Make sure the plug is fully inserted
into the power outlet.
Failure to comply may cause a fire, electric shock, a malfunction of the device
or an accident.
Do not disassemble, attempt to repair or modify this device
in any way.
Failure to comply may cause a fire, electric shock or other injuries.
Contact your local distributor for advice on repairing the device.
If you feel an earthquake, see lightning or hear thunder,
turn off the power and unplug the device.
Failure to comply may cause a fire or electric shock.
When disconnecting the plug from a power outlet, be sure
to pull it out by grasping its head instead of the cord (do not
touch the metal parts). Do not insert or disconnect the plug
with wet or damp hands.
Failure to comply may cause an electric shock, short circuit, fire or failure of
the device.
After using the device, when the device is not in use and
when cleaning it, be sure to turn off the power and remove
the plug from a power outlet.
Make sure to disconnect the AC adapter from a power outlet after
charging is completed. Failure to comply may cause a fire or other
accidents.
Do not exceed the rated capacity of a power outlet or wiring
accessory (do not connect too many plugs to one outlet).
Failure to comply may cause an electric shock, short circuit,
fire or failure of the device.
Do not use if the AC adapter is damaged or if the wall
socket is too loose.
Failure to comply may cause an electric shock, short circuit, fire or
failure of the device. Contact your local distributor for advice on
repairing the device.
Do not damage or modify the AC adapter. Do not apply
unnecessary force, bundle or twist.
Failure to comply may cause the cable to break, resulting in a fire or an
electric shock. Straighten out any twists in the cord before storing.
Disassembly
is prohibited
Removing
the plug
Overloading of
an electric circuit
is prohibited
Use of a damaged
cable or plug
is prohibited
Careless or
reckless use
is prohibited