YAMAN Bloom 6 User Manual

11
Basic method of use
How to Use
Make sure to remove makeup before using the device on your face.
If you use the device over makeup, the foundation may cause dark staining of the skin.
1
Turn on the device
Press and hold the Power button. The Power button ( ),
Level button, Level lamp, and electrode head light up, and the
RF, EMS, and red LED outputs are activated.
Electrode head
2
Select the level
Each time the Level button is pressed, levels can be adjusted (Level 1
→
Level 2
→
Level 3
→
Power level
→
Level 1
→
Level 2…).
You can check the treatment level from the Level lamp.
Level button
Power button ( )
Press and hold the Level button to switch EMS on/off.
(Level button lit: EMS on; unlit: EMS off)
* When using the Power level, EMS cannot be turned off.
EMS on/off switch
Use only Level 1 upon the first use and until you are accustomed to use.
CAUTION
CAUTION
Level lamp
Power level
Level 3
Level 2
Level 1

YAMAN Bloom 6 Specifications

General

Brand	YAMAN
Model	Bloom 6
Category	Personal Care Products
Language	English