15
This device is not waterproof. Doing so may cause a failure of the device.
How To Clean
Please carefully clean the parts of the device that come into contact with the skin every time you use it and keep the device clean at all times.
Failure to comply may cause skin problems.
CAUTION
After Treatment
Do not wipe the device with solvents such as alcohol, thinner, benzene, nail polish remover, kerosene, chemicals
or polishing powder.
Failure to comply may cause damage to the surface of the device.
Do not leave the device with skin care products on it.
When cleaning the device, be sure to turn it off and disconnect the AC adapter from the main unit.
Failure to comply may cause an electric shock, short circuit or fire.
1
Wipe off any dirt using a well-wrung soft cloth or similar material.
• For stubborn stains, wipe gently with a cloth soaked in a diluted neutral detergent.
• Remove any skin care products remaining between the electrode rings of the electrode head with a cotton bud or cotton pad.
2
WARNING
Do not wash the device in water.
To Next Page
Loading...
Need help?
General
