Yamatake SDC31 Series User Manual

1
Yamatake Corporation
Digital Controller SIO
Driver
1 System Configuration.......................................................................................................3
2 Selection of External Device............................................................................................9
3 Example of Communication Setting...............................................................................10
4 Setup Items....................................................................................................................74
5 Cable Diagram ...............................................................................................................79
6 Supported Devices.......................................................................................................138
7 Device Code and Address Code..................................................................................152
8 Error Messages............................................................................................................156

Yamatake SDC31 Series Specifications

General

Control Method	PID control
Number of Control Outputs	1 or 2
Ambient Humidity	20 to 90% RH (non-condensing)
Input Type	Thermocouple, RTD, Voltage, Current
Output Type	Relay, Voltage, Current
Power Supply	100 to 240 VAC
Display	Digital LED
Control Output	Relay, Current
Communication	RS-485
Ambient Temperature	0 to 50°C
Type	Digital Controller

Summary

Selection of External Device

Example of Communication Setting

Setting Example 1

Demonstrates GP-Pro EX communication settings for a specific device.

Setting Example 10

Illustrates RS232C communication settings for SDC40A.

Setting Example 18

Details communication settings for DMC10 using ladder software.

Setting Example 30

Shows communication settings for DMC50 using ladder software.

Setup Items

SIO Type

Select the SIO type for communicating with the External Device.

Speed

Timeout

Retry

Cable Diagram

Cable Diagram 1

Cable Diagram 2

Cable Diagram 5

Cable Diagram 8

Error Messages