Yamatake SDC40B Series User Manual

1
Yamatake Corporation
Digital Controller SIO
Driver
1 System Configuration.......................................................................................................3
2 Selection of External Device............................................................................................9
3 Example of Communication Setting...............................................................................10
4 Setup Items....................................................................................................................74
5 Cable Diagram ...............................................................................................................79
6 Supported Devices.......................................................................................................138
7 Device Code and Address Code..................................................................................152
8 Error Messages............................................................................................................156

Yamatake SDC40B Series Specifications

General

Type	Digital Indicating Controller
Control Method	PID Control
Input Type	Thermocouple, RTD, DC voltage, DC current
Number of Control Outputs	1
Communication	RS-485 (optional)
Sampling Cycle	250 ms
Control Output	Relay, Voltage Pulse, Current
Alarm Output	Relay
Display	LED
Power Supply	100 to 240 VAC
Dimensions	48 x 48 mm
Ambient Operating Temperature	-10 to 50°C

Summary

Communication Setting Examples

Setting Example 1

Demonstrates communication settings for GP-Pro EX and the External Device.

Setting Example 2

Illustrates communication setup for a different device series in GP-Pro EX.

Setting Example 3

Provides communication configuration details for GP-Pro EX and specific external devices.

Setting Example 6

Configuration example for GP-Pro EX communication settings with external devices.

Setting Example 10

Example of setting communication parameters for GP-Pro EX with SDC40A series.

Setting Example 18

Example of setting communication parameters for GP-Pro EX with DMC10 series.

Setting Example 23

Communication settings example for GP-Pro EX with DCP551 series.

Setting Example 32

Example of setting communication parameters for GP-Pro EX with CMC10B series.

Supported Device List

Device and Address Codes

Error Messages