To Next PageTo Next Page
Need help?Do you have a question about the Yamatake Azbil CMQ-V Series and is the answer not in the manual?
General| Input Type | Thermocouple, RTD, DC Voltage, DC Current |
|---|---|
| Series | CMQ-V Series |
| Type | Digital Indicating Controller |
| Control Output | Relay, Voltage Pulse |
| Alarm Output | Relay contact |
| Communication | RS-485 |
| Power Supply | 100 to 240 VAC, 50/60 Hz or 24 VAC/VDC |
| Display | 4-digit LED |
| Control Method | PID control |
| Mounting | Panel Mount |
Explains safety icons used in the manual.
Details symbols and abbreviations used throughout the manual.
Describes the capabilities of the CMQ-V communication function.
Details connection methods for RS-485 communication.
Shows the pin configuration for CMQ-V series connectors.
Describes the procedure to configure communication settings on the device.
Lists and explains configurable communication parameters like address and speed.
Provides a general overview of the communication process between devices.
Explains the layered structure of communication messages.
Defines the components of the data link layer in communication messages.
Details the structure and content of the application layer.
Explains the RS command for reading continuous data.
Explains the WS command for writing continuous data.
Details the RD command for reading data in hexadecimal format.
Details the WD command for writing data in hexadecimal format.
Lists and explains codes indicating normal, warning, or error terminations.
Covers timing requirements for messages and driver control.
Provides additional notes on timing and data transfer efficiency.
Covers data types, formats, and storage memory for communication.
Details the memory addresses for various communication data types.
Lists communication data related to device parameters and settings.
Lists data concerning the operational status of the device.
Details parameters for setting flow rate set points (SP).
Provides data related to totalized flow measurements and settings.
Lists parameters for configuring various device functions.
Details parameters for device setup and configuration.
Provides essential guidelines for developing master station programs.
Offers sample programs for communication tasks.
Presents a C++ sample program for reading and writing data.
Lists checks for diagnosing communication failures.
Details the technical specifications for the RS-485 interface.
Provides a reference table for character codes used in communication.
Explains wiring and setup for connecting with the CMC10L converter.
